View 192 Engineering jobs on the Polytec Personnel website en-gb Copyright: (C) Polytec Personnel 180 Our client is seeking two instrument assemblers for a two-week, short term but very important project. The first 3 to 4 days (starting 2nd/3rd of September) will be based in their Cambridge offices and the following week in their Sweden office. You must already be an experienced instrument assembler and used to working with precision equipment including optical, mechanical and electronic sub - assemblies, you should also be computer literate. You will be making changes to a current product line that needs some adjustment. Full expenses will be paid for the time spent abroad. You must have a valid passport and/or Visa if applicable, to travel to Sweden. http://www.polytec.co.uk/jobs/instrument_assembler_21098.html Fri, 29 Aug 2008 16:01:35 GMT Our client is seeking 2 Test Engineers to fault find, service and repair their top of the range products. You must be able to repair analogue and digital circuitry to component level. Test experience is a must as are soldering skills, to include experience with surface mount rework of all package sizes. Hours of work are 8-4pm Monday - Thursday and 8-2pm on Fridays. This role is to start immediately and should run for at least 2-3 months but may well be extended. http://www.polytec.co.uk/jobs/test_engineer_21096.html Fri, 29 Aug 2008 10:01:31 GMT Our client is looking for 2 assembly technicians to work in their St Neots base. You must have excellent soldering skills for this role as well as good all round electronic assembly skills. The role is initially temporary but may lead to a permanent position for the right candidate/s. This is to start as soon as possible. http://www.polytec.co.uk/jobs/electronic_assembly_technician_x_2_21093.html Thu, 28 Aug 2008 14:01:36 GMT Our client is seeking an experienced electromech technician to start immediately for a few weeks work. You will be assisting engineers in testing, faultfinding, and repairing printers, monitors and PC's and must therefore have excellent assembly and soldering skills. Any experience in fault finding would be a bonus. http://www.polytec.co.uk/jobs/electro-mechanical_technician_21084.html Wed, 27 Aug 2008 16:01:30 GMT Our client is looking for a technical operator to work at their modern site. The role will involve working as part of a multi-skilled team involved in fine alignment, assembly and test of mechanical components, often working with microscope equipment, all in a clean room environment. You must have excellent attention to detail and experience of fine pitch soldering, optical assembly or optical fibre handling would be an advantage. This role may go from temporary to permanent for the right candidate. You must also be prepared to work a 6-2, 2-10 shift in the future if required. For exceptional candidates the client may be willing to pay £7.62 per hour but you must be able to demonstrate skills above and beyond the required elements. http://www.polytec.co.uk/jobs/technical_operator_21078.html Wed, 27 Aug 2008 11:01:33 GMT Our clients are looking for a machine operator, initially on a temporary basis, with the possibility of going permanent. The job will entail ensuring the machines are running to full capacity, filling in appropriate paper work and keeping the general area tidy. For this role, you must have previous machine operation experience. Previous experience of using a press tool, setting machines/press tools and using a surface grinding machine would be advantageous. Above all, you must be practical, reliable and you must have a strong hands-on ability. You will work a 4 day week, 7am-5.30pm, with half an hour lunch and breaks. http://www.polytec.co.uk/jobs/machine_operator_21077.html Wed, 27 Aug 2008 11:01:33 GMT Our client is looking for a temporary warehouse person/stores assistant for one month, to help ensure the correct packaging and dispatch of a new product. This will involve making sure all additional items required with the packages are included(i.e. cables, booklets and all relevant documentation), as well as logged correctly on to their computer system. You need to have previous experience from an engineering/manufacturing dispatch environment and you must be computer literate and able to work on your own initiative. http://www.polytec.co.uk/jobs/experienced_dispatch_warehouse_person_21068.html Fri, 22 Aug 2008 13:01:48 GMT Our client make specific cables for companies, and this role is to take the information from customer, make up the schematic drawings ( they use 2D TurboCAD Goldmine and Excel) so that the production team are able to make product to customers specifications. You should have gained experience in a similar post or have recently gained a qualification such as an HND/Degree in Electronic and Electrical (or equivalent). There is a strong possibility this role will go perm in the future. http://www.polytec.co.uk/jobs/schematic_cable_draughtsperson_21055.html Wed, 20 Aug 2008 14:01:45 GMT Our client is currently recruiting a temporary Systems Engineer for immediate start. Successful candidate will be responsible to complete system testing, assist with the completion of formal design reviews and support qualification testing. MAIN DUTIES:*Write a System Test Plan and Procedure.*Design and build a system test rig.*Work with the customer to complete project documentation and achieve project milestones.*Prepare for and coordinate formal design reviews internally and with the customer.*Provide technical support to Procurement and Manufacturing during the first builds.*Arrange/co-ordinate design verification and qualification testing and provide support to external test houses.SKILLS:*Experience of aerospace industry (or similar safety critical sector) including electronic products. *Systems Engineer with knowledge of electronics and mechanics. *Experience of system level testing. *Experience of qualification testing at the equipment level. *Strong documentation skills (Word/Excel/Powerpoint). *Qualifications (HNC/HND/degree/PhD, CIPD, etc)*1st or 2nd class degress in an engineering discipline http://www.polytec.co.uk/jobs/systems_engineer_21034.html Tue, 19 Aug 2008 10:01:41 GMT Our client is urgently seeking an Embedded Hardware/Software Test Engineer for immediate start. This is a temporary position for a minimum of 2 months. Excellent pay rates.The Role:Working with a team of software and hardware engineers to assist with the verification of new embedded image processing hardware.The main tasks:Writing Test CasesRunning test cases on various platforms including:· PC Based Simulation models - ModelSim - NCSim· Hardware based emulation kits· FPGA based real-time system modelsInitial analysis of any issues foundThe Candidate:3 years plus experience in either:· An FPGA/ASIC design or test role including significant verification experienceand/or· An embedded low level software design or test role including verification/debug on new target hardware platforms - especially FPGA based systems.· Nice to have:· Knowledge of scripting languages, such as- Python - Perl, · C/C+ desirable· Assembly code and assembler experience would be useful.· Familiarity with ModelSim/NC-SimMust have a degree or equivalent experience in Computer Science or Electronic Engineering http://www.polytec.co.uk/jobs/embedded_hardware_software_test_engineer_21027.html Mon, 18 Aug 2008 15:01:44 GMT Our client is seeking a number of experienced mechanical design engineers with immediate effect. This is due to a large order from their head office in the States. Knowledge of Solidworks would be beneficial however candidates who are competent with any design packages will be considered. You will have good attention to detail, be enthusiastic and self motivated with a "can do" attitude. All the roles are on-going. http://www.polytec.co.uk/jobs/mechanical_design_engineers_21017.html Thu, 14 Aug 2008 18:01:27 GMT Our client is currently looking for a temporary Machine Operator (Press Brake, Programmer/Setter/Operator) who can run Amada HFE and HFB machines. It is a temporary role and would be for at least 2 weeks possibly extending to 3 or 4 depending on workload. Immediate start. http://www.polytec.co.uk/jobs/machine_operator_20978.html Mon, 11 Aug 2008 11:01:41 GMT Our client is currently seeking a Device Development Engineer for a long-term contract, to help develop low liquid volume fluidic systems with active concentration techniques for high production volume medical devices MAIN DUTIES:*Design and analysis of fluidic systems including magnetic and electric field concentration methods*Detail design and production of CAD models and drawings for prototype parts and test rigs*Assembly and commissioning of test rigs*Test and develop designs to achieve target specifications*Analysis of test data and verification of simulations*Writing appropriate documentation (e.g. detailed specifications, test specifications, reports)SPECIFIC KNOWLEDGE / TECHNICAL SKILLS REQUIRED:*Minimum 2:1 Bachelors degree in mechanical engineering or physics from a good university.*Minimum 3 years experience in medical device research and development.*Experience in laboratory working. *Awareness of general HSE guidelines and good laboratory practice.*High level of analytical, critical, methodical thinking to solve engineering problems. *Familiar with data manipulation and analysis. *Strong mathematical skills to carry out calculations and build models.*Strong self-starter, able to run with problems on their own with little supervision.*Team player, able to cope with changing technical and project requirements.*Strong communication skills, oral and written. Able to present work effectively and argue their viewpoint if required.*SolidWorks experience an advantage.*Matlab / Simulink and MathCAD experience an advantage. http://www.polytec.co.uk/jobs/device_development_engineer_20972.html Wed, 06 Aug 2008 14:01:28 GMT Our client is currently seeking a temporary Sales Co-ordinator, the candidate will be responsible for providing office based support for up to 5 Area Sales Managers in defined regions. This includes cross functional problem solving and administrative support.MAIN DUTIES:*Work closely with the Sales Managers in your given region to help achieve business goals.*Dealing with customer enquiries, leads and literature requests*Preparation of quotations*Processing sample/trial requests*Entering machine orders onto the database system and liaising with the factory for despatch dates*Reviewing weekly reports to follow up delivery of 3rd Party Machine orders and liaising with Sales Managers about any changes*Adding all Leads/Samples/Trials and Orders to the database*Raising credit notes*Process Return of machines when necessary*Working with colleagues and Managers at all levels *Deal with customer complaints in a professional and effective manner*Providing phone cover for each other as well as the Aftermarket team and the Technical Support Team at all timesSKILLS:*Experience of using the Oracle ERP system would be advantageous, although not necessary, as training will be given. *Word processing and excel skills are a requirement however and a basic knowledge of using intranet and internet sites would also be useful.*The role requires you to be able to interact with customers at all levels providing exceptional customer service. *This post would suit someone used to working within a busy office environment, capable of using their own initiative whilst working with a minimum of supervision. http://www.polytec.co.uk/jobs/sales_coordinator_20962.html Mon, 04 Aug 2008 10:01:29 GMT Our client is currently recruiting a temporary Aftermarket Co-ordinator to join their team for a long contract. The candidate will work as part of the UK Aftermarket Team, will be assisting with the update and renewal of scheduled fluids agreements and discount arrangements and managing the day to day customer Training enquiries and bookings. MAIN DUTIES: *Working alongside the Aftermarket Manager, reviewing and analysing the last year's usage and spend for fluids.*Contacting customers regarding the renewals / amendments to scheduled delivery and discount agreements.*Agreeing the revised schedules and discounts ensuring the timely receipt of customer purchase orders and documentation.*Updating database with the discounts agreed and ensuring that new scheduled deliveries are loaded on to the database.*Organisation and filing of the paperwork for Aftermarket agreements.*Responding to all Customer Training enquiries providing details on courses available, dates, and pricing.*Confirming availability with the customer and booking of all courses, liaising with the Group Training Academy and sending out joining instructions.*Invoicing the customer in a timely manner.*Recording the courses completed within IX Direct.*Providing phone cover for within the Aftermarket team. (Answer in 3 to 5 rings).*Support queries from customers relating to BuyDomino.com*Raising credit notes.*Raising complaints on behalf of customers and the department as required.SKILLS:*To be able to use / learn to use Oracle and IX direct operating systems. Excel and word is required. Knowledge of using intranet and internet sites is also desirable.*To be able to interact with customers at all levels to the point of advising and problem solving.EXPERIENCE AND QUALIFICATIONSThis post would suit a well organized person who is used to working within a busy, office environment. The applicant should be capable of using their own initiative. The role requires flexibility, a sense of urgency and an understanding of customer's needs and the ability to work well in a team environment. Effective communication at all levels is essential together with self-motivation and the temperament to work constructively when under pressure. http://www.polytec.co.uk/jobs/aftermarket_coordinator_20961.html Mon, 04 Aug 2008 10:01:29 GMT Our client is currently recruiting a Precision Machinist to join their team. This is a long-term position with the potential to become permanent.Main Duties:*Able to complete a job from point of receiving a drawing to de-burring finished parts.*Work on one-off and small batch work.*Be competent machining complex parts.*Operate and set machines.Desired Knowledge:*Bridgeport - Heidenhain conversational*Haas tool room mill/lathe - Fanuc G codes system.*Use a manual lathe, universal mill and other standard workshop equipment.*Ability to produce a high standard of work with good productivity.*Able to read/work from engineering drawings.*Other skills such as use of surface grinder, welding and brazing would be useful but not essential. http://www.polytec.co.uk/jobs/machinist_20955.html Thu, 31 Jul 2008 12:01:31 GMT Our client requires a production assemblers to work in their finishing department on a short term contract. The work will involve wiring, soldering and buffing. The work is very intricate so candidates must be dexterous. Other duties will include light mechanical assembly tasks. Hours of work will be 8am - 4pm or 9am-5pm. http://www.polytec.co.uk/jobs/production_assembler_-_finishing_dept_20942.html Tue, 29 Jul 2008 15:01:30 GMT Our client is seeking a good mechanical assembler to build and potentially solder simple connectors and basic wiring in a traffic signal system. You must have demonstrable assembly skills and and any soldering skills would be advantageous. You will be working to detailed instructions. The hours of work are 9-5pm with half an hour lunch. http://www.polytec.co.uk/jobs/production_assistant_20940.html Mon, 28 Jul 2008 16:01:32 GMT Our client is currently recruiting a Temporary Laboratory Technician to join their Research Department, this will be an initial 6 month temporary booking with the potential to become a permanent position.Main Duties: -To assist in the routine manufacture and testing of Sphere's sensor chips in order to support sensor development; this will predominantly involve treatment and etching of chip prototypes, mounting of chips and wire bonding-To assist in the planning and implementation of device and concept testing, utilising the most appropriate and effective methods-To assist in the analysis of test results-To assist research activities-Participation in research team meetings Skills:- A minimum of two years experience in a similar laboratory role desirable-Science based degree or good grade Science 'A' levels.-Familiarity with semiconductor technology and good understanding of material science is highly desirable-Experience in planning and developing experiments-Safe handling of chemicals used in the processing of semiconductor materials;-Ability to develop and follow procedures in a repeatable manner and to a high standard-Experience in the use of fundamental principles of sound design, experimental methodology and analysis of experimental results-Experience of working with quality systems e.g. ISO desirable http://www.polytec.co.uk/jobs/laboratory_technician_-_research_20922.html Tue, 22 Jul 2008 12:01:32 GMT Our client is currently seeking a Temporary Laboratory Technician to join their Sensor Development department. Six months temporary booking, potential to become permanentMain Duties:-Preparation of solutions in accordance with good laboratory practice.-Setting up and operating sensor-testing equipment-Troubleshooting and problem solving-Keeping a laboratory notebook-Data analysis-Attending team meetings to report on test results-Optimisation of test methods-Verification of test methods-Planning and organising efficient sensor testing-Routine maintenance and calibration activitiesSkills:-A minimum of two years experience in a similar laboratory role desirable- Science based degree or good grade Science 'A' levels. -Ability to follow an SOP-Experience in planning and developing experiments-Ability to develop and follow procedures-Familiarity with scientific instrumentation-Preparation of solutions according to good laboratory practice-Use of a laboratory balance, pH meter, pipettes, volumetric flask, mixing equipment-Knowledge of safe handling of chemicals and COSSH requirements-Calculation of molarities, volumes etc-Follow an SOP or set of instructions -Able to conduct lengthy and repetitive test procedures to a high standard - Experience of working with quality systems e.g. ISO desirable http://www.polytec.co.uk/jobs/laboratory_technician_20921.html Tue, 22 Jul 2008 12:01:32 GMT Our client is looking for a CNC Operator to start immediately on a 2-4 weeks contract. Any experience of working on Amada machines would be useful, however it is more important to have a good general CNC punching and pressing background. They operate a 40-hour working week and there may be some overtime available. http://www.polytec.co.uk/jobs/cnc_operator_20903.html Fri, 18 Jul 2008 12:01:33 GMT Our client is currently seeking a Commodity Buyer to join their team. MAIN DUTIES:_Strategic management and development of supply base._Elimination and management of risks within the supply chain._Maintenance of the data on the Purchasing application of Oracle._Cost management and reporting._Provide commercial support to other departments and where necessary co-ordinate supplier involvement._Support other areas of the company with regard to activities that involve the Supply Base. (Man.Eng, Accounts, SQA, Material Control and Cycle Count Activities)._Ensure that the company's Terms and Conditions are maintained and updated with all suppliers._Support the ECO process with regard to all communication with suppliers, managing any changes with production and minimising the cost of change through obsolescence._Manage and give support to stock management activities in line with Purchasing and Operations Directives. _Plan and deliver cost reductions._Co-ordinate the selection and introduction of new suppliers in line with current procedures.EXPERIENCE AND QUALIFICATIONS:*Computer literate (Microsoft Excel, work and Outlook)*Basic understanding of Contract Law and Standard Co Terms and Conditions*Individual and Team problem solving skills*Ability to negotiate at all levels*An understanding of current purchasing practices and techniques. *Basic understanding of accountancy techniques *Buyer level role experience http://www.polytec.co.uk/jobs/commodity_buyer_20897.html Fri, 18 Jul 2008 10:01:31 GMT Our client is currently recruiting a technical author to cover maternity leave within their Technical Publications Department.MAIN DUTIES:-The authoring and production of Company Product manuals using Adobe Framemaker.-To be responsible for the compilation, assimilation and production of Technical Publication manuals and other deliverables, from engineering drawings/sketches and technical briefs both written and oral. -The maintenance of effective communication between Project Leaders/Managers and the department.-To assist in the technical evaluation of proposed project requirements and to provide estimations of work content and timescales.-Ensuring that the required deliverables for all projects are on-time and to the highest quality standards.-The provision of a list of project requirements to the Technical Illustrator as required. -Assist in the maintenance of the Adobe Framemaker operating system and provide recommendations/suggestions on ways in which the system efficiency can be improved when appropriate.-To be responsible for the on-going maintenance and updating of product manuals, in response to Engineering change, product enhancements and customer requirements, as directed.KEY REQUIREMENTSAn Electro/Mechanical engineering background.A recognised industry-standard qualification in Technical Authoring/Communication.A proven and recent track record as a Technical Author with a minimum of 5 years experience.Familiarity with The Supply of Machinery (Safety) Regulations 1992 (as amended).Computer literacy essential and experienced and fully conversant with Adobe Framemaker.Sound word processing skills are a pre-requisite. (MS Word).A sound understanding of how to portray Graphical User Interface software documentation at User level.A sound working knowledge of Adobe Acrobat software.A good understanding of current illustrative and reprographic techniques. http://www.polytec.co.uk/jobs/technical_author_20884.html Fri, 18 Jul 2008 10:01:31 GMT Our client requires a test technician to work in the wet test area. You must be experienced in test, faultfinding and mechanical build. You should be aware you would be working with inks. The working hours start at 7.30am with various finish times depending on workloads. You will need to have a pair of safety boots. http://www.polytec.co.uk/jobs/test_technician_x2_20882.html Tue, 15 Jul 2008 17:01:27 GMT Our clients are looking for a validation engineer initially for a 6mth contract to ensure that their production facility is adequately validated, to work with the process development engineers in order to generate installation and operation qualification documentation and to manage and report on the progress of IQ and OQ activities. You will also define and generate the process qualification documentation, review externally produced documentation related to validation activities and review and ensure mitigation of process risk assessments.Skills: § Sound understanding of quality systems and their management§ Excellent knowledge of the FDA regulations§ Thorough understanding of 13485 and GAMP § Good project management skills§ Able to produce concise reports§ Highly competent with Microsoft WordEducation: § HND/Degree § Full Driving Licence preferredExperience: § A minimum of four years experience in a similar role within the medical device industry, ideally with two separate companies§ Working within an automated manufacturing environment would be desirable§ Involvement in audits with notified bodies http://www.polytec.co.uk/jobs/validation_engineer_20794.html Tue, 24 Jun 2008 16:01:32 GMT Our client is looking to for an electronics engineer that has a good track record in the development of PCB level mixed analogue and digital circuits. You should have a methodical approach to your work, making accurate measurements and keeping high quality test records. You should be able to demonstrate many (not necessarily all) of the following skills:· Experience of analogue design using ICs and discrete transistors.· Ability to test, diagnose and modify discrete designs to meet required performance· Familiar with design proving and willing to undertake commissioning, diagnosis and test work in the lab.· Some understanding and appreciation of stability analysis and compensation networks· Understanding of device speed limitations, failure modes and breakdown mechanisms· Experience of design for high reliability and design for manufacture· Good practical skills including hand-assembly of SMT components· Ability to work as part of a team to business-critical deadlines · Understanding of switch-mode power supply designs, audio amplifiers, video amplifiers or other analogue circuits http://www.polytec.co.uk/jobs/electronics_engineer_20687.html Wed, 04 Jun 2008 11:01:33 GMT Our client requires an IT Student for a 12 month placement, the role will be based in Godmanchester Cambridgeshire, you will need to have your own transport as you will also do IT Support work at the RandD Site in Cambridge and Head Office in Cambourne. The objective of the IT department is to provide value-adding and effective IT services and support to the company so as to support the execution of the company's strategy. The IT Support position has a general responsibility in supporting this objective.Detailed specification of role:For the entire organisation, ensure that the following is maintained:* IT Support* Active Directory* Microsoft Exchange* BES Server and administration* Mail monitoring systems* The network, its components and infrastructureSpecifically for the local site, to ensure that:* IT systems are fully operational* IT Group Leader is fully informed of any issues affecting local site operations* Backup systems are operational * All servers, networking equipment and phones are administered effectively* Problem free access is available to users for all IT resources* Problems are managed effectively using the helpdesk logging system* Server room and facilities are fully operational, clean and tidy at all timesFor the local site, the person in this role will evaluate any major problems encountered and report back to the IT Group Leader for solutions where appropriate. Minor problems will be dealt with and coordinated through the application of standard corporate procedures. http://www.polytec.co.uk/jobs/it_support_assistant_student_placement_20536.html Fri, 09 May 2008 11:01:29 GMT Our client requires an electro-mechanical assembler to manufacture various types of electronic and mechanical assemblies to required training standards and within set timescales. Your duties will involve the manufacture of various types of assemblies using prepared worksheets, using bonding and fixing techniques i.e. epoxy resins, screws, nuts, drilling etc. Also to assist with the building of prototypes and to carry out initial testing of piece parts used in production assemblies. Applicants should have a pleasant personality, a good work record, be flexible and be prepared to work with minimum supervision. You should be prepared to work overtime if and when required. Some experience in electro-mechanical assembly is required. There could be an opportunity for this role to be made permanent in the near future. http://www.polytec.co.uk/jobs/production_assembler_20454.html Fri, 18 Jul 2008 16:01:39 GMT Our client is currently looking for a cleanroom operative for their new manufacturing site in Huntingdon. The role is to follow set procedures to assemble and test printheads which are used in inkjet products. The successful candidate should ideally have a proven track record of working in a manufacturing cleanroom environment and must be able to pay particular attention and work accurately with the building of the product, although some of the processes will be automated. The department work a double-shift pattern working alternative weeks Monday to Fridays: Shift A) 06.00 to 14.00 (12.45 finish on Fridays). Shift B) 14.00 to 22.00 (20.45 finish on Fridays). ). There may be an opportunity for this role to go permanent at a future date. http://www.polytec.co.uk/jobs/production_operative_-_huntingdon_20452.html Fri, 04 Apr 2008 16:01:35 GMT Our client is currently seeking a Hardware Platforms Consultant to work directly with clients on a variety of operating assignments, providing innovative technical consultancy and developing creative technical solutions. The role will involve the development of digital electronic platforms and technology enablers for clients in telecom, automotive, and defence sectors, new business development and technology management. Educated to degree level in a relevant disciplineSkills:*A strong technical background, especially within PHY/L1 Wireless Communications technology development using FPGA and/or ASICs, with expertise in VHDL (Verilog is an advantage).*An understanding of what makes a complete product work to deliver "right-first-time" solutions efficiently*The applicant should have a system engineering view, that is, electronic design from concept through to production. *Expertise in microprocessors/controllers and peripherals*Experience of embedded real-time systems*Experience of working to wireless communications standards (3GPP etc) and an understanding of evolving standardsDesired knowledge:*ASIC design process and technology*Experience of embedded RT software*Knowledge of mathematical simulation tools (e.g. Matlab) http://www.polytec.co.uk/jobs/hardware_platforms_consultant_21074.html Tue, 26 Aug 2008 16:01:09 GMT The client make specific cables for companies, and this role is to take the information from customer, make up the schematic drawings (they use 2D TurboCAD Goldmine and Excel) so that the production team are able to make product to customers specifications. You should have gained experience in a similar post or have recently gained a qualification such as an HND/Degree in Electronic and Electrical (or equivalent). http://www.polytec.co.uk/jobs/schematic_cable_draughtsperson_21058.html Wed, 20 Aug 2008 16:01:13 GMT Our client is currently seeking a Test Engineer to test electronic assemblies and systems making clear, accurate records of the test results. Prioritise work schedule and adhere to our quality system. To devise methods of testing equipment and systems and produce test jigs or other means to fully meet the customer's requirements in the most cost effective and efficient manner.MAIN DUTIES:*An in-depth knowledge of audio, video and digital circuit principles;*Excellent understanding of telemetry and transmission principles;*Understanding of common electronic interfaces standards;*Experience of modern CCD cameras and lenses combinations*Logical approach to fault-finding.SKILLS:*Qualified in Electronic engineering to HNC or equivalent experience;*Excellent verbal and written communication*Competent in the installation/configuration of computer manufactures software*A working knowledge of IP networking, RS232/ 485 Comms and Fibre optic comms*Experienced and competent with the testing of 1 off bespoke systemsSPECIFICS:The jobholder will organise and run system acceptance tests, which are witnessed by the customer. Some work out of the office and over extended hours may be required. http://www.polytec.co.uk/jobs/test_engineer_21052.html Tue, 19 Aug 2008 17:01:09 GMT Our client is currently seeking a Electronic Design Engineer to work within an established team of electronics/software/mechanical engineers, you will be adaptable, flexible in approach, and with broad experience covering a range of electronic engineering disciplines. Work will involve carrying out electronic engineering across the full product lifecycle including requirements capture, system and circuit design, development of hardware and embedded software, verification and validation, and product support. The role will also involve assisting with proposals for customers and potential visits to customer sites. In the more senior roles, you will also act as Team Leader and System Design Authority on designated bids and programmes to ensure that the requirements are being met fully in line with customer expectations.You will have been working within the defence/aerospace industry, and possess a high level of communication skills including good specification and report writing skills, and will have a high degree of professionalism.Discrete electronics design and schematic capture, High Speed Digital systems and Analogue ElectronicsEXPERIENCE and SKILLS: FPGAs; DSPs; Power PCs; high voltage/current electronics. VHDL, Embedded C Schematic capture e.g. Orcad, FPGA development tools DO-254/DO-178BXilinx, Actel and Altera ToolsMentor Graphics, modelsimApplications, Avionics, Communications Safety critical systems, Data Communications, Voice Communications, Security and EncryptionHas worked for aerospace/defence company Requirements capture; design verification.Senior Engineer level; Team Leadership ability http://www.polytec.co.uk/jobs/electronic_design_engineer_21037.html Tue, 26 Aug 2008 10:01:09 GMT Our client is currently looking for an Assembly and Test Engineer to be part of a team designing, building and testing gravity gradiometer instruments. The role will be to provide specialist manufacture and assembly of gravity gradiometer components and systems.MAIN DUTIES:*Develop understanding of instruments and technologies to allow manufacturing requirements to be determined and to ensure that full capabilities of available techniques are exploited.*Interact with engineers within the company to ensure this understanding and to advise on practicable solutions to manufacturing issues and good manufacturing practice.*In liaison with project manager, manage personal workload to ensure milestones are achieved.*To plan, perform and document final system assembly and testing of gravity gradiometer instruments. *Provide guidance to technicians (for example, standards of workmanship and technical problem solving).*Reporting of progress against agreed timescales both for individual tasks and projects.*Obtain and exploit best practice advice from appropriate internal and external sources.*Initiate, lead and support appropriate process and product development concepts.*Establish and maintain effective working relationships throughout the business, in particular liaise with peers in similar roles to gain the benefits of common practices. *Maintain professional awareness of external developments in techniques and processes and identify where these may be used to benefit the business.*Implement quality policy and procedures as defined in the quality system.Be aware of and ensure compliance with Health and Safety policy and procedures.DESIRED SKILLS:*Recognised apprenticeship or well qualified by experience.*Undergraduate degree in engineering or science or subjects.*Background in equipment development. *Broad range of assembly and/or test experience.*Experience of complex microelectronic assemblies.*Experience of micro-joining technologies. *Cryogenic experience.*Assembly techniques for micro-electronics and electronics assemblies.*Ability to generate and follow drawings, schematics and to specify components.*Cryogenics, superconductivity or SQUID systems. Integration of assemblies into systems.*Ability to design suitable assembly and test protocols, adapting them to reflect outcomes http://www.polytec.co.uk/jobs/assembly_and_test_engineer_21035.html Tue, 19 Aug 2008 10:01:08 GMT Our client is currently seeking an Electronics Development Engineer to support the research and development of their cutting edge diagnostics acoustic biosensor technology platform, developing high stability and low noise resonators, oscillators and measurement systems operating in the VHF range.MAIN DUTIES:*To support the research and development of electronics systems in our acoustic biosensor technology platform.*To carry out development, build, test, documentation and production engineering of electronics devices and systems.REQUIREMENTS:*A 1st or 2:1 class degree in electronics, physics or related engineering disciplines from a leading university.*Familiar with an analytical design approach working with software-based models, experimental validation and data analysis.*Excellent PCB level mixed analogue and digital design skills.*Ability to test, diagnose and modify designs to meet required performance.*Experience of design for high reliability and design for manufacture.*Experience in frequency control and timing devices required; sensor and instrumentation experience highly desirable.*Experience in test and measurement environment using analyzers, scopes, meters and GPIB instruments required.*Experience in software and firmware development, FPGA and microcontroller-based system is useful.*Experience in RF and communications, and knowledge of integration and packaging technology is useful. http://www.polytec.co.uk/jobs/electronics_development_engineer_21014.html Thu, 14 Aug 2008 17:01:07 GMT Our client is a seeking bright, ambitious Electronics/Software Engineers to create, analyse and develop new medical technologies. The successful candidates will be expected to make a solid contribution to a group with core business in drug delivery devices, manufacturing systems, diagnostic instrumentation and surgical technology.MAIN DUTIES:*Immediately engage in a technically and commercially stretching environment*Contribute to and lead technically demanding medical technology projects*Effectively integrate with a talented multi-disciplinary team of like-minded peopleSKILLS: *A 1st or 2.1 class degree in electronics or computer science *Intrinsically high levels of motivation and stamina*Excellent communication and presentation skills *A good mixture of analytical, experimental and creative capabilities*Strong interest / track record in medical device development http://www.polytec.co.uk/jobs/electronics_software_engineers_-_medical_20965.html Mon, 04 Aug 2008 17:01:08 GMT Our client is seeking a qualified engineer who will develop in to their technical manager in time. You will be in charge of leading the field introduction of a new product concept aimed at the domestic and commercial sectors in a new and rapidly emerging market. This will also entail managing and developing the technical aspects of the products, as well as running trials with major clients and establishing and running the field installation resources. The products are sophisticated and use a wide range of communication technologies including wireless, wired and internet protocols. They have sensors, which measure appliance loads and consumption; they also have an element of control embedded in them. Your skills therefore need to span electrics, control engineering, in-home communications and IT. In addition they have an ambitious development programme for the successful candidate to lead. They wish to challenge the standard 'field service' role and differentiate themselves in terms of approach and service levels and will be looking at the engineer/manager to look at alternative ways of finding the right approach. There will be a challenging range of skills to master but you will have a significant role to play in the business where your input and ideas will be encouraged.They will consider an engineer currently working in the controls industry or an energy/environmental consultant who has experience of working with new energy technologies such as smart metering. It is essential to be degree qualified (or equivalent) in an engineering or scientific discipline and ideally have experience in a commercial environment in electrical products and/or energy sectors. In addition, you should have a thorough understanding of IT based consumer products and their management, have a positive attitude and a willingness to innovate and try new approaches to build robust and scalable systems in a fast growing business. The post will include mainly UK travel and you should have an interest in green issues. http://www.polytec.co.uk/jobs/technical_and_field_services_engineer_manager_20948.html Wed, 30 Jul 2008 13:01:06 GMT Our client is currently seeking a Product Analysis Engineer to Analysis/Debug of devices returned as defective from customers to confirm failure and determine root cause. Performs diagnosis of failing devices through a range of test methods to provide electrical fault isolation and direct physical FA as required on CSR's wireless semiconductor devices.Skills: *Degree or equivalent qualification/experience in Electronic Engineering, Physics or other relevant discipline. *Experience of Product Engineering, assembly and test engineering. *Capable of using ATE to test and datalog packaged devices and interpreting results in order to determine the most appropriate Failure Analysis route.*Familiarity with Digital and Mixed Signal test methods*Experience of Teradyne Catalyst and Flex ATE *Capable of using electrical bench test equipment and Design Verification boards to test and verify reported failure modes on CSR's wireless devices.*Familiarity with RF testing and terminology. *Capable of using semiconductor diagnostic equipment including microprobe/curve tracer to perform first level electrical FA. *Knowledge of CMOS manufacturing, construction and deconstruction. http://www.polytec.co.uk/jobs/product_analysis_engineer_20938.html Mon, 28 Jul 2008 14:01:07 GMT Our client is currently seeking a Interoperability Engineer to be responsible for the interoperability of products/equipment with recently developed Bluetooth and other wireless technology products/equipment on the open market. MAIN DUTIES:* Maintains the detailed Interoperability suite of test cases. * Helps define the Interoperability Group test processes and problem analysis/resolution processes. * Executes interoperability testing of new Bluetooth and other wireless technology products against other end products on the market. * Gathers air traces of issues found and analyses those traces to pinpoint where the issue lies and what the proposed solutions might be. * Communicates issues to the relevant engineers and project manages the resolution of IOP issues in our client's software * Creates technical specifications for any changes required to third party software and communicates these changes to the external third parties (with a view to improving Interoperability of devices across the market). * Monitors and procures third party end products and arranges testing in the laboratory. * Develops knowledge of Bluetooth, Wi-Fi and other technologies under test. * Develops and maintains the Interop Device Database and Interop Test Results Database SKILLS:* Ability in assessing and diagnosing faults in an analytical manner * Degree or equivalent qualification * Self motivated * Ability to work autonomously * Good communication skills * Interest in Bluetooth / Wi-Fi technology * Experience in interoperability and/or system testing * Competent in computer networking http://www.polytec.co.uk/jobs/interoperability_engineer_20935.html Mon, 28 Jul 2008 14:01:07 GMT Reporting to the Customer Support Team Leader, the Customer Support Controls Engineer will share responsibility with other team members for managing installations, training, servicing, product upgrade and providing ongoing customer support. Key activities include: Carrying out site surveys, planning and organising product installations, Conducting product installations, including operator training and product acceptance sign-off and handover to customers and implementing Product upgrades. You will be educated to at least HNC / HND level in electrical or electronic engineering, with knowledge of Allen Bradley Logix 5000. The successful candidate will ideally have several years experience in a similar role, hands-on machine build experience, and experience of site installations and travel worldwide. Proven experience of electro-mechanical machinery is essential, as is experience of motion systems, electrical circuits, pneumatics and PLC control. Self-motivation with the ability to work independently is a prerequisite for this role, as is the ability to demonstrate strong analytical and troubleshooting skills. http://www.polytec.co.uk/jobs/customer_support_controls_engineer_20933.html Fri, 25 Jul 2008 16:01:07 GMT Our client is currently seeking an Electronics/Software Engineer to join their team. testMAIN DUTIES:*Ability to design simple analogue and digital electronic circuits*Fault finding to component level*Produce technical documentation such as technical manuals, specifications, etc*Liaise with sub contractors, researching suppliers and sub contractors*Ability to program in Ansi C, preferably with experience of hardware control*Produce Bills of Materials for sub assemblies QUALIFICATIONS AND SKILLS REQUIRED:*A degree in Electronic or Software Engineering*Programming in Windows and Linux advantageousBENEFITS:*Contributory pension scheme after qualifying period*Contributory private healthcare scheme after qualifying period*Free private health screening after 5 years service*21 days annual leave, rising according to years of service, plus 8 bank/public holidays*Free on-site parking*Corporate Membership of Hills Road Sports and Tennis Centre*Corporate Membership of The Arts Theatre, Cambridge*Bonus after qualifying period. http://www.polytec.co.uk/jobs/electronics_software_engineer_20905.html Fri, 18 Jul 2008 14:01:08 GMT Our client is currently seeking a Principal Algorithms Engineer to Support the development of the test mobile product line with emphasis on wireless communication issues, system definition and support of the implementation (DSP, FPGA, RF) and test teams.Main duties: *Specifications for procedures and algorithms to test wireless systems based on OFDM and SC-FDMA, developing a test mobile for 3GPP LTE, and beyond. *Generate solutions to algorithmic and implementation issues, across disciplines of software and hardware.*Enable and progress the co-simulation of algorithms.*Aid the development and testing within the test mobile product line. *Act as a point of expertise on the specification and algorithms for the implementation teams.Requirements:*Candidates should have a University degree in telecommunications engineering or digital signal processing plus at least 5 years relevant work experience. *A PhD in a relevant field is likely. *An understanding of digital communication (MIMO, OFDM, WCDMA, FEC), wireless technologies (3GPP or WiMax/WiFi) and basic programming (C, MATLAB). *Knowledge of UTRAN or UE implementation is essential and some basic embedded DSP 'know-how' would be highly desirable. *A sound understanding across the system of the implementation and complexity http://www.polytec.co.uk/jobs/principal_algorithms_engineer_20904.html Fri, 18 Jul 2008 14:01:08 GMT Our client is currently recruiting a Display Test Engineer to develop and implement test methods, LabView based software and testing equipment for P-OLED test devices and displays. Perform experimental and non-standard tests for displays and assist with the failure analysis of devices and displays.MAIN DUTIES:-Inventing new and improving existing test procedures for P-OLED, PV and OTFT test cells and printed displays.-Increase the accuracy, robustness, reliability, quality and efficiency of the testing processes.-Maintain, specify and modify the test equipment and software to support process improvement activities-Ensure the available testing equipment is efficiently utilised and resourced-Line management of Technical Assistants and operators-Ensure the best working practices in test are implemented, followed and documented via Standard Operating Procedures and Risk Assessments-Design and carry out experiments to improve confidence and quality of test results-When appropriate carry out novel experimental and non-standard test procedures-Maintain the equipment and software ensuring it is operational - propose and implement upgrades-Implement and monitor best practices in device testing-Monitor usage of equipment to maximise utilisation and working efficiency-Identify, report and propose solutions to any issue arising from either personnel or equipment likely to impact on either test throughput or measurement quality-Set objectives, monitor performance and carry out appraisals for direct reports-Train junior members of staff-Design and carry out test experiments to improve our understanding of device properties (if appropriate in collaboration with device physicists)-Ensure HandS standards are adhered to in the test laboratoriesSKILLS:-A Degree in a physics, engineering, computing science or an electronic engineering related discipline-A minimum of 3 years direct experience in product testing preferably in a physics, optoelectronics or electronics production environment http://www.polytec.co.uk/jobs/test_engineer_20899.html Thu, 17 Jul 2008 17:01:07 GMT Our client, who are leading supplier of embedded computer and communications processors, need to recruit a test technician/engineer to test PCB boards and other electronic equipment. You will be faultfinding to component level as well as loading software on to the boards. There will be other responsibilities for a more experienced test person, that a junior candidate will be expected to grow into. Ideally you will have an ONC/HNC, or a demonstrable track record in a test role. IT skills are also very important. For a less experienced candidate, i.e. a recent ONC student, there may be the opportunity to continue your training with the company. http://www.polytec.co.uk/jobs/test_technician_20892.html Wed, 16 Jul 2008 16:01:07 GMT Our client is looking for an electrical/electronics test technician who will be responsible for testing products such as completed instruments, systems and individual PCB's, following standard procedures. You will load and test the relevant standard software to meet specific customer orders and log and maintain accurate and accessible test records. You will liaise with the assembly team to maintain quality standards and meet the production schedule and will fault find at component level. You will also have some mechancial experience as there will be some build work required. You must ensure test equipment is correctly calibrated and you must maintain good stock control. Despite the reasonably advanced duties of this role, the client is looking for a candidate that they can train and will develop into the role. Formal qualifications are not essential although some electrical test or standards training would be useful. http://www.polytec.co.uk/jobs/test_technician_20889.html Thu, 24 Jul 2008 17:01:09 GMT Our client, based just outside Cambridge, requires an experienced and qualified wirer to build and wire up control panels and special purpose machinery for electon beam welding equipment. You will be working from diagrams and notes from engineers on the build. The company operate a fairly flexible hours system and are open from 7am - 6pm. http://www.polytec.co.uk/jobs/wirer_20856.html Tue, 08 Jul 2008 16:01:07 GMT Our client is seeking a technical author who will ensure customers have the most up-to-date information on products, including product briefs, application notes, data sheets and release notes. You will provide clear, concise, comprehensive, accurate and timely documentation to customers, ensuring that the content meets corporate image and style. You will also review other authors' documents. You must have previous technical writing experience in the engineering/electronics industry, ideally semiconductor and have experience with start-up companies. You will be experienced in graphics creation and have a degree in related subject such as engineering or technical communications. You must have excellent spoken and written communications skills, XML knowledge and be practiced at information gathering and analysis. Flexibility in scheduling and setting priorities is a must as is the ability to organise work under pressure from several deadlines. http://www.polytec.co.uk/jobs/technical_author_20851.html Mon, 07 Jul 2008 16:01:07 GMT Our clients are looking for a test engineer to develop test methods, gather, record and deliver test data on printhead reliability and characterisation and evaluate performance based on data obtained.DUTIES- Assemble and maintain test equipment and area- Develop print test methods and equipment to enable the capture of high quality, reproducible print performance data. - Capture data and summarize findings in a report. - Pro-active self development using the latest technologies and methodologies along with continuous methods improvement. - The work can be of a repetitive nature QUALIFICATIONS and PERSON SPECIFICATION- GCSE (or equivalent) Maths or Statistics- GCSE (or equivalent) Science or Physics- A good command of English- Basic understanding of electronics- Experience of testing procedures- Experience in digital print an advantage- Flexible/diligent with a keen attention to detail- Methodical approach- Good team worker and strong communication skills http://www.polytec.co.uk/jobs/test_engineer_20849.html Fri, 04 Jul 2008 17:01:07 GMT Our client is looking for a Design Engineer, to work within multi-disciplinary teams on major development projects, applying mechanical engineering and CAD abilities to realise novel medical technologies. The position will require working within a team of highly talented, multi-disciplinary engineers to develop world-leading medical products for clients around the globe.Specific responsibilities Initially, this position involves taking roles within development projects with exposure to all aspects of development from contract negotiation to final delivery. You will be involved in concept generation, analysis of system architectures and mechanical design and liaison across other engineering disciplines. You will be responsible for generation of concepts and layouts of systems in CAD, tolerance analysis of product designs and preparation of technical reports. This is an excellent opportunity for an engineer with the ambition and ability to achieve excellent results in a highly demanding industry and to find novel and radical solutions to new and existing problems under tough commercial, regulatory and time constraints.Minimum requirementsTo meet the demanding requirements of this role you will have an excellent degree in mechanical engineering or a related discipline. You should have a level of practical experience, ideally having spent time in an engineering design environment. Exposure to the Pharmaceutical or Medical Device industry would be an advantage. Experience in 3D CAD, preferably Pro Engineer and Solid Works is required. An understanding of manufacturing techniques, assembly processes and material selection is also desirable. Hands-on experience in leading mechanism design, stress analysis, mould flow analysis and other CAD analysis tools would be beneficial. http://www.polytec.co.uk/jobs/design_engineer_20829.html Tue, 01 Jul 2008 17:01:07 GMT You will ideally have at least five years experience in the design of RF and/or microwave ICs, although applications from candidates with component level PCB or MIC design experience will also be considered. In addition to IC design the position would also include PCB/MIC based circuit and sub-system design. Successful candidates would be expected to design in a range of technologies including: Si RFIC, GaAs MMIC, Multi-Chip Modules (MCMs), and SMT based design at RF and microwave frequencies to component level. Experience in, or knowledge of, some of the following areas would also be an advantage: Low noise synthesiser design, communications system design, and digital modulation schemes AD/DA conversion, passive component design (filters, couplers, baluns) and RF PA design. http://www.polytec.co.uk/jobs/rf_microwave_ic_designer_20824.html Tue, 01 Jul 2008 15:01:06 GMT Our client requires a consultant level designer within the analogue peripherals group to carry out the design of next-generation embedded power supply management systems from system level through transistor level to, in some cases, physical level.Key Responsibilities:* To think of new ideas to advance the client's existing power-supply management systems and innovate such systems for future products.* Once the new idea is created, specify the implementation at system level and also create the design specification of individual sub cells.* This consultant level designer will be responsible for reviewing, overseeing and specifying design work described in the point above, of other designers who will carry out the design of some parts of such systems.* Carry out the design of parts thereof from system level through to transistor level and in some instances physical level.* There will be the opportunity for the successful candidate to extend their activities into other areas of design, which he or she may be interested in and is considered to be suitable for.Person Specification:* Extensive experience in the field of integrated power management cells on system-level as well as on cell-level* The ability to define complete power management systems and oversee their cell-level implementation by others* An excellent knowledge of integrated analogue design, especially of switched-mode power supplies and linear regulators, preferably obtained on CMOS process.* Some knowledge of processing technology* Good understanding of system modelling and layout* Good understanding of the physical design of power management systems as well as other IO-cells and ESD-protection* Enthusiastic with leadership qualities* Strong innovation skills* Good interpersonal skills* Excellent team player* Degree in Electronics (or equivalent) or strong experience in the above required skills.* Good knowledge of semiconductor physics would be useful. http://www.polytec.co.uk/jobs/analogue_ic_design_consultant_20815.html Tue, 01 Jul 2008 11:01:06 GMT Our clients are seeking a senior engineer within hardware design to support the development of internal chip/firmware test systems/infrastructure, customisation of chip emulation platforms, applications level support for chip development, and development of first off applications boards for their chips.Key Responsibilities:- To work with customers to generate technical requirements specification(s) and to run feasibility studies prior to the commencement of projects. - Provide technical leadership on projects and designs ensuring supporting services deliver on time, to specification and to the required quality standards.- To develop schematics and PCB layouts to a high standard with supporting firmware (Verilog, PIC code etc) as required.- To work with chip packaging and design groups to ensure that chips are optimised for their intended environment.- To investigate chip and customer design issues as required.- To support manufacturing with getting boards built, products assembled and production tested.Person Specification: - Excellent hardware design skills with proven track history- Excellent digital design skills and good analogue design skills- Familiarity with schematic and PCB CAD packages- Good Verilog design skills- Good C++/Assembler/Linux knowledge- Good communication, time management, document writing and organisation skills- Degree in Electronic Engineering (or equivalent) with proven track record of design skills- Appreciation of wireless communications (knowledge of Bluetooth, Wifi, cellular handset design etc), wireless comms product design and RF are all desirables http://www.polytec.co.uk/jobs/senior_engineer_-_hardware_design_20789.html Mon, 23 Jun 2008 17:01:07 GMT Our client is looking for a Commercial Manager, to contribute significantly to the growth of their business in design and development of consumer products.Specific responsibilities: · To create focussed marketing and sales campaigns. · Identify target companies and match them with appropriate technical offerings. · Initiate contact, make pre-sales visits and identify prospective business. · Build sales propositions and develop them into commercial relationships. · Lead the bid teams - working alongside a project manager and/or technical authority.· Mentor the senior technical members of the team across the company.· Close sales - negotiating terms and conditions. · Be part of the project delivery team. Experience/Background required:· Experience and track record within a potential target industry - consumer electronics, domestic appliances, FMCG, or energy systems.· Experience EITHER in Product Management for consumer products OR in key client management within a fee-for-service product development business. · Strong market knowledge of existing technologies. · Project management experience of taking consumer products from initial design to production is highly desirable. · Excellent degree in an appropriate science, engineering or design subject, and product or function development experience. http://www.polytec.co.uk/jobs/commercial_manager-_consumer_products_20786.html Mon, 23 Jun 2008 12:01:07 GMT The successful candidate will be talented in and excited by their field, joining an expanding instrumentation group in this vibrant young consultancy. You will contribute to highly qualified, multi-disciplinary teams working on a wide range of challenging technical projects for national and international clients.Our client is a young product design and development consultancy doing leading-edge work in medical devices, sustainable engineering and packaging and dispense solutions. They are looking for outstanding engineers to join their Electronics and Instrumentation group. To be successful, you will have excellent analytical and creative skills and be able to lead or contribute to multi-disciplinary teams working in a wide range of technical disciplines, and will have a proven track record of delivering demanding projects to high quality, on time and on budget. You must be self-motivated, comfortable with presenting your work and ideas to clients and be extremely adaptable. You will ideally have: An Electronics Engineering or Physics degree (1st preferably) from a leading university. Experience of embedded hardware and software development, preferably within a wider control and instrumentation environment.Excellent communication skills. Experience in one of our clients principal industry sectors, preferably gained either in industry or in a consultancy but able fresh graduates will be considered.A competitive salary and excellent benefits are offered, negotiable, depending on your experience. http://www.polytec.co.uk/jobs/instrumentation_engineer_20736.html Thu, 12 Jun 2008 12:01:08 GMT Our client is looking to recruit an electronics engineer that has a good track record in the development of PCB level mixed analogue and digital circuits.You should have a methodical approach to your work, making accurate measurements and keeping high quality test records.You should be able to demonstrate many (not necessarily all) of the following skills:· Experience of analogue design using ICs and discrete transistors.· Ability to test, diagnose and modify discrete designs to meet required performance· Familiar with design proving and willing to undertake commissioning, diagnosis and test work in the lab.· Some understanding and appreciation of stability analysis and compensation networks· Understanding of device speed limitations, failure modes and breakdown mechanisms· Experience of design for high reliability and design for manufacture· Good practical skills including hand-assembly of SMT components· Ability to work as part of a team to business-critical deadlines · Understanding of switch-mode power supply designs, audio amplifiers, video amplifiers or other analogue circuits http://www.polytec.co.uk/jobs/electronics_engineer_20686.html Wed, 04 Jun 2008 11:01:08 GMT Our client is looking for an RF Test Engineer, to specify, develop and carry out tests on radio systems developed by the company. The role includes both driving and contributing to the test requirements of wireless systems and being able to communicate these effectively to other members of the team. Specific responsibilities: · Develop test plans based upon top level product requirement specifications and engineering specifications. · Construct RF test platforms using commercial test equipment and custom fixtures. · Create automatic test programmes using Labview and Matlab or any other convenient programming language. · Undertake the testing of prototype and development systems.Minimum requirements:With relevant experience working as an RF test engineer, you will have experience of RF testing and its relevance to ultimate performance. You will be familiar with RF test equipment such as spectrum and network analysers, signal generators, power meters and be able to construct solutions using RF interconnection blocks such as mixers, filters, splitters etc. · You will be familiar with the language of RF testing such as sensitivity, noise figure, adjacent channel etc. · You will be able to write test programmes in Labview, Basic (e.g HPBasic) or similar ATE languages.· You will be able to create and present test reports in a logical and accurate manner. · A limited understanding and ability in circuit design and some basic proficiency in 'C' would be an advantage for this position. http://www.polytec.co.uk/jobs/rf_test_engineer_20676.html Mon, 02 Jun 2008 15:01:06 GMT Our client is looking for a Senior RF Systems Consultant, to take a lead design role for development of state of the art wireless systems from specification through to detailed component-level design, and eventual hand-over to volume production. Specific responsibilities: · Participate in sales meetings with clients. · Take a lead role in preparing specifications for wireless systems. · Prepare and generate the technical sections of bids and tenders. · Be capable of defining the most suitable analogue system design/architecture.· Take the lead role in the detailed design of wireless and wireless related hardware.· Where appropriate, create novel design solutions. · Act as a design mentor to more junior members of staff. · Where appropriate prepare and contribute to proposals and quotations.· Contribute to the maintenance and development of our CAD systems.Minimum Skills/Experience requiredWith relevant experience working as a radio designer for a company in the telecommunications or other relevant area, you will have:· Extensive and essential experience of both overall system design and RF circuit design.· An understanding of the wireless DSP will be considered an advantage. · Good knowledge of the product development process. · A proven record of getting designs right first time. · Good oral and written communication skills.· The ability to interact effectively at all levels in a client organization. http://www.polytec.co.uk/jobs/senior_rf_systems_consultant_20675.html Mon, 02 Jun 2008 14:01:06 GMT Our client is looking for a Graduate Electronics Engineer to help design, implement and test analogue electronic hardware. Specific tasks: * Designing analogue and digital circuits for use in radar and location systems. * Working with a team of PCB designers to design circuit boards. * Specifying and sourcing components. * Testing and evaluating prototype designs. * Researching and reporting on the capabilities of new and existing sensor technologies. Experience/background required:* An excellent first degree in a relevant engineering discipline. * A solid foundation in analogue and digital electronics design. * Strong mathematical skills. * Good communication skills, both written and verbal. In addition, any experience of the following will also be beneficial:* RF circuit design * Digital circuit design * Power supply design In addition, applicants should be both willing and able to work on UK defence projects. http://www.polytec.co.uk/jobs/graduate_electronics_engineer_20585.html Tue, 13 May 2008 15:01:06 GMT You will support a range of sophisticated leading edge UMTS test and measurement instruments and IP. This role involves frequent worldwide travel. Main duties and responsibilities will include:* Management of customer issues.* Troubleshooting and resolving complex problems. * Providing technical demonstrations and training.* Providing technical assistance for sales and product marketing.* Promoting products worldwide.You should be educated to degree level in a relevant field and have a good solid experience within a Field Applications or Technically focused discipline. You must have excellent troubleshooting capabilities and experience of software development or test and integration. Knowledge of C, C++ , ASN1 and WCDMA either L1, L2 or L3 would be ideal. Applicants must be proactive and adaptable with the ability to work on their own initiative. Excellent problem solving skills are required and candidates must be confident communicators, both written and verbally. The successful candidate must be willing to travel internationally for approximately 25% of the time. http://www.polytec.co.uk/jobs/senior_field_applications_engineer_20513.html Tue, 22 Apr 2008 13:01:07 GMT Our client is seeking a time served Electrical Commissioning Technician who is experienced in commissioning PLC, PC, and motion systems. The role will involve all aspects of electrical commissioning, from receipt of a fully assembled machine through to final test and hand over to the customer. You should be qualified to at least HNC or HND level in electrical and electronic engineering, with knowledge of Allen Bradley logix 5000, Beckhoff, Twincat and Siemens S7/Simotion an advantage. The ideal candidate will probably have at least 3 years experience gained in a product manufacturing environment, with proven experience of electro-mechanical machinery, motion systems, pneumatics, wiring and PLC control. Strong analytical and troubleshooting skills are essential, as is the ability to work independently. Flexibility will be required within this role, and there may be some requirement to work on-site. http://www.polytec.co.uk/jobs/electrical_commissioning_technician_20377.html Wed, 14 May 2008 11:01:12 GMT The idea candidate will have experience in high-speed analogue and digital design. Main responsibilities will be designing digital circuits for new products and updating existing products. Experience to include: Microprocessors, memory, FPGA and ADCs in excess of 50MHz. Basic FPGA design in VHDL (memory and data bus interfacing). PCB layout for performance and EMC compliance (ideally hands on experience) and Product architectural design and microprocessor firmware design. Knowledge of the following would be an advantage: High speed design with parallel data bandwidths in excess of 200MHz, analogue design including op-amps, filters and attenuators, Xilinx specific FPGA devices and design tool sets as well as USB and wireless interfaces. Other useful skills will include mechanical design of enclosures and accessories and automotive electronic systems (sensor interfacing and waveforms). http://www.polytec.co.uk/jobs/development_engineer_-_hardware_20262.html Fri, 22 Feb 2008 17:01:09 GMT Our client is looking for an Electronics Engineer. In this role you will be responsible for proposing novel solutions during early phases of a project, the specification, design, development and test of whole electronic subsystems, sometimes on multiple projects, as well as the design of interfaces between your electronics and that of other subsystems on the project. You will be carrying out your specific project tasks under tough commercial and time constraints. You will have: An excellent first degree in electronic engineering or a related discipline, a genuine passion for electronics, and engineering in general, some post graduate relevant industrial experience, strong technical and analytical skills, with key strengths in analogue and mixed signal electronics design. In addition, any experience of the following will also be beneficial: Low noise sensor electronics design, data acquisition system design, control engineering, an ability to apply MATLAB / Simulink as a design and simulation tool, microcontroller systems design and embedded control systems, embedded software design and implementation. A post-graduate qualification with a high level of practical experience would also be advantageous. http://www.polytec.co.uk/jobs/electronics_engineer_20217.html Mon, 18 Feb 2008 12:01:09 GMT Our client is looking for a PCB Designer. As a part of the Electronic Production Group, you will be involved in PCB design in the following areas: library part entry and checking, schematic capture, PCB layout, as well as PCB post processing and Gerber generation. You will work as a member of the core project team to provide design for manufacture input at all stages of the development process. Your main skill should be multilayer PCB layout using CAD tools. Experience in some or all of analogue and RF tracking, digital circuit layout, power electronics and digital circuit design is required. A background in production engineering and knowledge of surface mount PCB assembly requirements, including fine-pitched components, BGAs and small passives (0402 / 0201) will be an advantage. Ideally you should have some formal qualifications in electronic engineering, e.g. HNC so that you can understand critical aspects of the design through build and test. http://www.polytec.co.uk/jobs/pcb_designer_20159.html Thu, 07 Feb 2008 11:01:08 GMT Our client is seeking consultants and principal consultants for their Wireless Technology area. You will work directly with clients on a variety of assignments providing consulting expertise across a range of DSP and software platforms and designing and implementing digital signals processing software systems for operators and manufacturers in the wireless telecoms industry. You will be educated to degree level (2:1 or above) in a relevant technical discipline with proven experience in wireless DSP and embedded software development. You will bring a strong development background, demonstrating wireless systems engineering skills and also technical depth in 2G/2.5G/3G physical layer. You will have design experience of C/C++ embedded software systems and experience of DSP algorithm design and implementation. Development experience with systems based on real-time operating systems is also required. You will be self-motivated and target driven, a strong team worker and effective relationship builder with a strong selling and influencing ability. You must be able to demonstrate a solid project/people management track record in a high-tech complex environment and be willing to travel on business. http://www.polytec.co.uk/jobs/consultants_for_wireless_technology_20110.html Tue, 29 Jan 2008 13:01:09 GMT Our client requires a Senior Scientist to drive the further development of numerical techniques and algorithms for advanced OLED display panel addressing schemes, and support the development of display driver chipsets. Ideally a PhD (or equivalent) in Mathematics, Physics, Electrical Engineering, or another engineering or science discipline with a strong numerical component, and around 5 years direct experience in algorithm development (ideally hi-tech environment)is required. Experience of working with display drive schemes or image processing algorithms would be a distinct advantage but is not essential. A strong knowledge of linear algebra, linear programming and similar mathematical techniques, and experience of the development and use of numerical simulations, and any experience of combinatorial optimisation and design of experiment would be a distinct advantage. Good programming skills particularly Matlab or C/C++ and similar is required, and any knowledge/experience in Verilog and physical simulation/computational physics would be an advantage. You should have experience of simulation tools and languages,and general knowledge of display technology in general, OLED in particular would be an advantage. You should have outstanding interpersonal skills and the ability to communicate to different levels within and outside the organisation. An independent, resourceful and highly motivated individual is required, who has demonstrated the ability to take initiative. http://www.polytec.co.uk/jobs/senior_scientist_asd_group_20052.html Tue, 22 Jan 2008 12:01:08 GMT You will work in an environment that provides a challenge, support, excitement, variety, freedom from bureaucracy and a chance to see good ideas become real products. With have a flat management structure, all technology developers work 'hands on' designing and prototyping their own ideas. To be considered for this role, you will have followed exceptional academic achievement with a period of sustained achievement in industry and have gained experience in relevant technical fields as well as in project management and client management. Specifically, to be a strong candidate for this role you should be able to demonstrate the following: An outstanding understanding of applied physics and engineering principles; Creativity and problem solving skills; Good mathematical/analytical skills; Self motivation and an ability to operate with minimal supervision; Expertise in analogue and digital electronics; and knowledge of design for manufacture and manufacturing processes. http://www.polytec.co.uk/jobs/technology_developer_-_electronics_engineering_20031.html Mon, 21 Jan 2008 15:00:00 GMT Our client is looking for an Electronic Engineer. You will be involved in concept generation, analysis and development of system architectures, and analogue, digital and power electronics design. Initially, this position involves taking roles within development projects with exposure to all aspects of development from contract negotiation to final delivery. There are opportunities for this role to develop rapidly into management of projects, including having full responsibility for delivery to our clients. You will have an excellent first degree in electronic engineering or a related discipline and a genuine passion for electronics, and engineering in general. You should have some post graduate relevant industrial experience along with strong technical skills, with key strengths in digital and analogue electronics design. In addition, any experience of the following will also be beneficial: Power electronics design, control engineering, an ability to apply Matlab / Simulink as a design and simulation tool, micro controller systems design and embedded control systems and embedded software design and implementation. A post-graduate qualification with a high level of practical experience would also be advantageous. http://www.polytec.co.uk/jobs/electronic_engineer_20029.html Mon, 21 Jan 2008 15:00:00 GMT Our client is looking for a Digital Signal Processing Engineer, to create DSP solutions for wireless projects, from preparing the specification and designing the architecture through to detailed design, test, documentation and maintenance, and eventual hand-over of the full design to the client. You will have a good degree in engineering, mathematics or computer science and you must be fluent programming in one of C or MATLAB. You should have excellent mathematical skills, strong software engineering skills along with good communication skills, both verbal and written. You should ideally have a good grasp of radio communications theory. http://www.polytec.co.uk/jobs/digital_signal_processing_engineer_20028.html Mon, 21 Jan 2008 15:00:01 GMT Our client is looking for an Electronics Development Engineer. You will possess a qualification in electronics and have knowledge and experience in both analogue and digital systems design. You will be required to show competence and initiative in the development, build, test, documentation and production engineering of products. Experience in programming PIC or similar microcontrollers/microprocessors using C or assembly language and the use of CAD for mechanical drafting and packages for PCB layout and design would be highly desirable. http://www.polytec.co.uk/jobs/electronics_development_engineer_19999.html Tue, 15 Jan 2008 11:01:08 GMT Our client is the leading developer of technologies based on polymer light emitting diodes (PLEDs). The role is to provide technical support for the substrate patterning at the Development Centre. The main activities will be the production of patterned substrates to the required quality and timescale. You should be a Physics, Chemistry or Engineering graduate, or an experienced technician with approximately 2 years in a scientific environment, with either an HND or good A levels. Any previous experience of working in a clean-room environment is desirable. You must be computer literate as these will be used on a daily basis. The role is working on a double day shift rota. http://www.polytec.co.uk/jobs/technical_assistant_-_feol_19941.html Thu, 03 Jan 2008 15:01:08 GMT You will be responsible for foundry design rules file (DRC), and device recognition file (LVS/XRC), installation and performance testing including automation. You will ensure the quality of run sets to guarantee consistency across process nodes, provide technical assistance to analogue/RF IC circuit and layout designers with process verification issues. You should have a Masters/Bachelors degree in physics, computer science, electrical or electronic engineering. You should also have experience of supporting back-end verification tools and computer programming skills and be able to demonstrate proficiency in the following skills: 4+ years relevant experience, understanding the circuit design needs associated with deep sub-micron processes, back-end verification, experience in gdsii layer manipulation, p-cell design and xRC netlisting /simulation is desirable. Semiconductor process integration knowledge is an advantage. Programming languages will include - C, Perl for data structures, geometry, graphics, parsing and string manipulation,Unix shell scripting, Unix, Linux and Windows operating systems. In addition to the above, candidates are expected to have excellent written and communication skills and be a self-starter. http://www.polytec.co.uk/jobs/back-end_verification_engineer_process_group_19923.html Fri, 22 Aug 2008 11:01:33 GMT Our clients are looking to recruit a consultant in optics to join their science and systems group. The group develops leading edge technologies such as microfluidics, optics, micro-mechanical devices and products such as medical diagnostics, fuel cells, displays and sensors for a range of markets from healthcare to consumer products.They are seeking a highly skilled consultant with a background in optical physics and engineering to lead demanding development projects and build new business to join our team. The candidate will have first class technical and communication skills, experience at leading large multidisciplinary projects and an interest in and aptitude for developing business.Qualifications- Physicist or Engineer with a 1st or 2.1 degree and PhD.- Track record at commercialising complex optical or optoelectronic technology in an industrial setting and delivering multidisciplinary projects against challenging timelines and product requirements.- Good market awareness and keen interest and capability in developing new market opportunities for technology. Business development or similar experience preferred.- Very good communication and team skills including leading multi-disciplinary science and engineering teams.The Role- Contribute to technically demanding development projects in a technical and/or project management capacity.- Take the lead in client communications and management.- Take responsibility for best in class project delivery.- Identify and pursue opportunities to develop new business through individual and team creativity and building relationships with international clients. http://www.polytec.co.uk/jobs/consultant_in_optics_19878.html Tue, 11 Dec 2007 14:01:07 GMT Our clients are looking for an Optical Physicist to join their science and systems group. This group develops leading edge technologies such as microfluidics, optics, micro-mechanical devices and products such as medical diagnostics, fuel cells, displays and sensors for a range of markets from healthcare to consumer products.They are seeking a highly skilled optical physicist/engineer to contribute to and potentially lead demanding development projects. The candidate should have first class technical, communication and creativity skills and be capable of developing their role to include more general consulting, large programme management and business development.Qualifications- Physicist or Engineer with a 1st or 2.1 degree and PhD from leading institute- Strong working knowledge in imaging and geometric optics, optical design, simulation software and device fabrication and testing.- Very good oral and written communication, presentation, and team skills.- Project management and commercial experience an advantage.The Role- Optical physicist/engineer contributing to and potentially leading technically demanding development projects.- Participate in the client interface, communication and management.- Take responsibility for best in class project delivery. http://www.polytec.co.uk/jobs/optical_physicist_19877.html Tue, 11 Dec 2007 14:01:07 GMT To carry out physical vapour deposition (PVD) process development activities at the companies manufacturing site and to support the design and fabrication of PLED displays and test devices.MAIN ACTIVITIES* Develop and implement a programme of activities to produce reliable PVD processes on a range of deposition tools - including thermal, E-beam evaporation, DC magnetron sputtering and reactive sputtering. Provide direction and targets and assist with resource allocation.* Work with other engineers on the introduction of new deposition methods and materials as required by various company projects.* Design and execution of experiments to explore dependence of LEP device performance on PVD processes.* Develop process control metrics for PVD area. Work with other engineers and scientists on process improvements and yield investigations.* Provide input on design rules and requirements for new display products* Support production of PLED displays for demonstrators or external project customers.* Write and update standard operating procedures in the BEOL area.* Draw up risk and COSHH assessments for tools in the BEOL area and keep these up to date* Recognise and submit new inventions to the IP Team.* Produce and deliver presentations to internal and external meetings.* Compose and deliver training packages to internal and external customers.* Write reports of engineering investigations and studies.* Ensuring work procedures are followed and all necessary controls operating.KEY WORKING RELATIONSHIPS* Work with project and programme managers on current and future projects particularly Top Emission project * Work closely with production operators and other area engineers to maintain current metal deposition processes and develop new processes* Work with operations staff on scheduling and work flow issues and control.* Work with equipment maintenance staff on equipment improvements, modifications and problems.* Work with other groups to resolve process/yield issues affected by or affecting metal deposition processes.KNOWLEDGE/EXPERIENCE/SKILLS REQUIRED* Degree level or higher in physics, materials science or related subject.* Three or more years working in a cleanroom or similar hi-tech production environment* Direct hands-on experience of various deposition processes.* An understanding of the physical principles of deposition processes and their effect on materials properties.* Hands-on experience of process problem solving and design of process trials.* Strong practical nature and good mechanical understanding * Motivated individual with good initiative, and a proven ability to solve problems on-the-fly.* Good team-playing skills and the ability to operate in multi-disciplinary/cross-functional teams* Results orientated and committed to the goals of the company* Individual who is organised and methodical in their approach* Individual who has the resilience and determination to follow the solution of a complex and difficult problem through to completion * Good communication skills especially report writing http://www.polytec.co.uk/jobs/senior_engineer_scientist_pvd_process_development_19797.html Tue, 20 Nov 2007 16:01:07 GMT Our clients are looking for a development manager to manage their sensor development activities. You will lead a team of development scientists and engineers, develop their electrochemical sensors, plan, and carry out test programmes, interface with external test facilities/academic institutions and identify suitable concepts for future product generations. You will also collaborate with other team members on development projects. It is essential to have a good track-record in the area of chemical sensing or bio-sensing, a degree in biochemistry, chemistry, physics, engineering or biology, (a post-graduate degree is advantageous,) some years' experience of developing electrochemical sensors for commercial applications in the medical device or related industry and a proven track record of "bringing products to market." Experience of working with quality systems e.g. ISO, EN13485, experience of design control, project management and with manufacture of electrochemical devices are also required. http://www.polytec.co.uk/jobs/sensor_development_manager_19776.html Mon, 19 Nov 2007 11:01:07 GMT Our client is seeking a digital physical design engineer to be responsible for the implementation of complex digital designs on mixed signal ICs. This will cover all activities associated with digital physical design such as synthesis, layout, timing and power analysis, DFT insertion, ATPG, CTS, logical equivalence, LVS, DRC and simulation. Much of the work requires skills in scripting for automation as well as a good understanding of the tools, libraries and issues involved with DSM implementation. The key responsibilities of the role are: Digital implementation of complex mixed signal IC's; Verification and sign-off of IC's for tapeout; Contribution to the infrastructure and automation of digital physical design flows; Evaluation of new implementation and verification tools and helping to define and implement strategies to optimise the power, timing and area of ICs . You must have a good honours degree from a leading institution and relevant experience of digital implementation and verification. You will also have scripting skills in a Linux environment. Familiarity with Synopsys implementation and verification tools would be useful. http://www.polytec.co.uk/jobs/digital_physical_design_engineer_19486.html Tue, 10 Jun 2008 10:01:36 GMT The company are a leading designer and manufacturer of process gas and liquid analysers, used worldwide by the power and chemical industries for measurements of pollutant gas emissions. They are seeking a physicist (qualified to honours degree or above) to function as a designer and experimental specialist in a major project. The areas of experience they are looking for cover experimental techniques, reporting and drawing conclusions from data, Optical systems (Visible /Infrared),Tuneable diode lasers, Quantitative Spectroscopy and Chemometrics, Signal Processing (circuits and microprocessors), and documents for production. http://www.polytec.co.uk/jobs/physicist_19382.html Tue, 18 Sep 2007 15:01:06 GMT Our client is looking for a Principal Electronic Engineer. You will take the technical lead working closely with other electronic and software engineers while integrating with other technicians, engineers, consultants and other designers. You will be required to organise the electronic and software engineering design effort to meet project requirements as well as providing creative solutions to problems. You will become the first point of contact for both clients and engineers on projects you are involved with for technical issues. Your role will include your strong technical expertise to liaise with clients to understand their technical needs in a project and writing proposals which capture these needs. You will be involved with the hands-on product development and design of electronic systems. You will have an excellent first degree in electronic or electronic and software engineering and you will have substantial experience in an electronic engineering role. A solid knowledge base in analogue, digital and embedded systems will be a strong advantage for this role, as will experience of working in the medical device sector. Experience of a significant subset of the following is required for the role: Opto-electronic sensing systems, Analogue to Digital and Digital to Analogue conversion techniques, Signal Processing using FPGAs, DSPs and general purpose microcontrollers, Control of motors and actuators, Implementing IEC 60601 requirements, Power supply design, Product architectural design, Design for manufacture, as well as interface between hardware and software. http://www.polytec.co.uk/jobs/principle_electronic_engineer_19212.html Wed, 15 Aug 2007 16:01:07 GMT Our client is looking for an Analogue Design Engineer. You will have a strong track record in the development of PCB level high speed/high power analogue circuits, possibly in the design of audio amplifiers, video amplifiers, switch mode power supplies or radars. You will be expected to demonstrate many of the following skills: Experience of high speed / high power analogue design using IC and discrete transistors, design of high speed, moderate power, switch mode analogue circuits, a good understanding of control theory/stability analysis and compensation networks, as well as circuit simulation using time domain simulation package e.g. SPICE / Spectre. In addition you will need experience of high speed PCB modelling, including parasitic extraction and transmission line effects, a thorough understanding of BJT and MOSFET device characteristics and circuit topologies and an understanding of device speed limitations, failure modes and breakdown mechanisms. http://www.polytec.co.uk/jobs/analogue_design_engineer_19170.html Mon, 06 Aug 2007 14:01:06 GMT Our client is looking for a Principal RF Engineer / RF Amplifier Specialist to join their system team as a technical specialist involved in research and development of high power RF amplifiers incorporating Envelope Tracking technology. Experience of high power RF design using LDMOS and GaAs transistors is essential, as is a good knowledge of modern amplifier design and familiarity in efficiency enhancement techniques. The successful candidate will demonstrate most of the following skills / experience: Experience of 1-3GHz high power single ended and/or balanced linear RF amplifiers using LDMOS and/or GaAs devices, an understanding of gain/efficiency/ linearity design trade-offs and design optimisation techniques, knowledge of load pull and efficiency enhancement techniques such as Doherty amplifiers and Class F operation, familiarity with RF linear and non-linear simulation e.g. ADS, MWO, as well as a thorough understanding of low impedance matching techniques using microstrip transmission lines. http://www.polytec.co.uk/jobs/principal_rf_design_engineer_19169.html Mon, 06 Aug 2007 14:01:06 GMT Your role will include fault-finding and repair of customer radios to component level, training of third party engineers to level two capability, log fault data into control system (Pomacs) and provide technical support to customers over the phone as and when required. You will also visit customer premises for upgrading hardware and software and meet the required product turn around times. It is essential to be an excellent team worker with previous experience of fault finding in communications products. You will have a relevant electronics qualification, minimum ONC. Finally, you must be highly computer literate and be able to use Applications as part of the job. Experience of Radio Communications would be highly desirable. http://www.polytec.co.uk/jobs/fault_find_engineer_18295.html Mon, 07 Apr 2008 16:01:33 GMT Your role will include the customisation of customer radios as required. You will carry out sample aircheck tests on inbound sets. You will Audit, train and support production expertise as required, to ensure products meet the quality standard. Manage staff to effect customisation, repairs and modifications to products as required by the Chief Operations Officer. You will ensure that security of k, TEI pairs, SCKs and any Tetra algorithms is maintained in the Customisation Area, provide and operate to a budget, achieve a high quality of loading keys and customisation and ensure products are customised to meet customer service/delivery targets. You must have strong motivation to achieve Customer Service targets. http://www.polytec.co.uk/jobs/customisation_manager_17757.html Fri, 25 Apr 2008 17:01:48 GMT Our client is seeking a Hardware Support Engineer to join their Radio Group. You will have good communication skills and enjoy working as part of a team. With an appropriate HND/Degree qualification you will have at least 3 years experience in an electronics company undertaking small design and assembly tasks. You will have the following skills and experience: good mechanical assembly skills; capable of undertaking small electronic design tasks; previous involvement in performing RF measurements on equipment; previous involvement in debug, test and calibration of electronic equipment; able to produce accurate documentation; and good IT skills. http://www.polytec.co.uk/jobs/hardware_support_engineer_17556.html Fri, 08 Aug 2008 12:01:30 GMT Our client is seeking a development engineer with analogue hardware experience. The ideal candidate will have six or more year's design experience of high bandwidth; low noise analogue circuits for data capture in excess of 300MHz. Main responsibilities will be designing ultra high performance front end circuits for new products. Experience should include: Designs using discrete active and passive components; High impedance buffers (FETs), programmable gain amplifiers and attenuators; Multiplexers, filters, differential drivers and ADCs; PCB layout for high performance and EMC compliance (ideally hands on experience) and design simulation experience. Knowledge of the following would be an advantage: Analogue ASIC and custom chip design. http://www.polytec.co.uk/jobs/development_engineer_-_analogue_hardware_17518.html Mon, 23 Apr 2007 16:01:30 GMT Our client is currently recruiting an Applications Engineering Manager to manage, mentor, motivate and deploy the applications team to ensure that tier one customers are supported worldwide. Additionally organise applications resources to support satellite offices. To organise the team to achieve internal BU goals relating to the release of new products and devices. Key Responsibilities:*Manage the functions applications team (8 employees) including training and development, performance reviews and delegating responsibilities. Ensuring that technical expertise is appropriately distributed across the required disciplines.*Align applications resource for core development tasks as required and allocate suitable resource for customer development tasks including h/w design, s/w design, and custom firmware changes as required.*Work as required to achieve maximum Bluetooth qualifications and chip sales involving on-going assessment of applications resource distribution based on technical and commercial factors.*Provide technical support for products both internally and externally. *Produce weekly and monthly status reports to management to provide an update to senior management of current customer technical issues and work performed by the applications team to solve issues and mitigate risks.*Perform on-site and off-site training primarily to customers.*Represent applications function at customer meetings. This involves some presentations but typically involves real time discussions of work performed by the application team to assist customer's goals.*Continue to implement and improve processes by way of transferring lessons learned in to better engineering practices *Ensure laboratory is safely managed and HandS rules are adhered to.*Travel to customer sites if necessary.*The role involves some mid term planning but mainly involves short term planning in response to customer interrupt driven tasks Person Specification: Required:*Degree or Higher Degree in electronics or similar qualification*System level understanding of Bluetooth. Experience of fault diagnosis and rectification*Previous experience of managing a team of people*Proven ability of leadership, mentoring, training. Motivational and influencing skills*Working knowledge of Bluetooth headset architecture*Ability to think quickly and positively during discussions with customers.*Ability to combine technical and commercial reasoning in to the decision making processDesired:*Knowledge of h/w (digital and analogue) and embedded software*Cultural awareness of multinational company*Awareness of HandS legislation and environmental issues http://www.polytec.co.uk/jobs/applications_engineering_manager_21090.html Thu, 28 Aug 2008 14:01:11 GMT Our client is currently seeking a RF Engineer to design on-chip passive components and develop simulation tools. Key Responsibilities:*On-chip passive component design. Examples include inductors, transformers, baluns, capacitors and interconnect lines.*Simulation of passive structures using 3D and 2.5D field-solving simulators.*Setting up test benches, analysing simulation data and comparing it to measured data.*Building equivalent lumped models, based on simulation and measured data, for passive and active networks. *Investigation and simulation of coupling mechanisms between two or more on-chip passive structures.*Investigation and simulation of packaging to quantify interaction between packaging and on-die structures.*Providing layout and floor-planning guidance and support to analogue/RF designers.*Calibration of field solver simulation setup against measured data provided by the foundry.*Development of source code to integrate simulation tools into a common design environment.*Cadence: simulation and layout for test chips.*Measurement of test chips - wafer level and board level.Person Specification: Required:*Masters or Ph.D in electronics, or equivalent experience *Sound knowledge of electromagnetic theory and 3D electromagnetic field solvers.*Experienced in RF engineering skills: component level, circuit level, system level, and propagation.*Familiar with simulation tools (Ansoft Designer, HFSS, Agilent Momentum, Spice simulators)*Familiar with RF measurement instruments, measurement methods, calibration and de-embedding methods.Desired:*Knowledge of AutoCAD, Matlab, high-level languages.*Experienced in using Cadence.*Excellent written and verbal communication skills*Excellent problem solving skills*Self-starter who has the ability to identify and exploit new opportunities. *Can play a leading role in technology development http://www.polytec.co.uk/jobs/rf_engineer_21089.html Thu, 28 Aug 2008 12:01:07 GMT Our client is currently seeking a Mechanical Engineer to join their engineering and maintenance team. The role will involve the design and construction of advanced vacuum coating plant as well as supporting our maintenance team on our range of vacuum coating and heat treatment plant. You should have formal engineering qualifications, and several years experience in either the vacuum industry or similar high tech environment carrying out system design, troubleshooting or maintenance.Suitable Skills/Experience:· Design and manufacture of mechanical components and systems· CAD ideally 3D Solidworks or similar· Vacuum processing plant: design, maintenance and repair· Hands on precision fitting and assembly of vacuum systemsOther useful background:· Computer literate: CAD, networks, MS office etc· Tig welding· Machine shop · Basic electrical knowledge· PLC and PC control systems http://www.polytec.co.uk/jobs/mechanical_engineer_21085.html Wed, 27 Aug 2008 17:01:08 GMT Our client is currently seeking a Backplane Test Engineer to invent, develop, support and implement new procedures the testing of Thin Film Transistor (TFT) Active Matrix (AM) backplanes for use in OLED Displays.MAIN DUTIES:*Invention and design of new test equipment which is capable of testing TFT backplanes.*Development of Test equipment to test TFT backplanes.*Implement and perform tests on externally supplied backplanes.*Develop novel test strategies for testing large numbers of TFTs.*Design for Test implementation on new designs.*Support of new backplane designs.*Performance and reliability characterisation of backplanes.*TFT Transistor characterisation. *Specify and source new test equipment for testing AM TFT backplanes.*Prepare and test Standard Operating Procedures (SOP) and risk assessments (RA) for the testing of backplanes*Design and support of new equipment for testing AM TFT backplanes.*Identify and implement process improvement for new and existing test processes.*Support the design for test implementation on new AM TFT backplanes.*Characterisation of TFTs using Semiconductor Parameter Analyser (SPA).*Perform reliability testing of AM TFT backplanes.*Routine testing of AM TFT backplanes*Failure analysis of failed displays and AM TFT backplanesESSENTIAL KNOWLEDGE:*Degree in Electronic Engineering or relevant Physics / Science*A minimum of 2 years direct experience in semiconductor testing or display testing.*Experience of semiconductor wafer testing.*Use of Wafer probe equipment and Semiconductor Parameter Analysers*Basic understanding of Thin Film Transistors (TFT) backplanes.*Strong electronics knowledge.*Customer focussed, self motivated team player with the ability to operate in a multi disciplinary/cross functional team environment.*Excellent communication skills.*Flexible - able to adapt to changing project plans and company direction.*Sound problem solving and Failure Analysis skills.*Computer literacy is essential.DESIRABLE KNOWLEDGE:*Knowledge of Active Matrix TFT Backplane and related circuits*Knowledge of OLED displays and fabrication*Understanding of reliability testing. http://www.polytec.co.uk/jobs/backplane_test_engineer_21073.html Tue, 26 Aug 2008 16:01:09 GMT Our client is currently seeking a Production Technician to prepare, operate, and maintain DNA synthesis instrumentation. Perform quality control checks. Perform synthesis runs according to production schedule and associated WI. Monitor and replenish reagents on DNA synthesis instruments as required. Record run data on QMS paperwork and update database and associated electronic forms with appropriate information. Maintain safe working environment at all times.MAIN DUTIES: *Productivity - Continuous turnover of DNA synthesis machinery, cleavers and purifiers. Minimize machine downtime. Assemble and fill plates with support as dictated by production needs. Label tubes.*Quality - Perform cycle checks for each run. Monitor and record visual steps. Monitor chemical usage at end of synthesis and report inconsistencies. Work to departmental QMS standards at all times.*Communication and Documentation - Inform supervisor and document all instrument/synthesis problems. Record start time of each run. Record reagent lot numbers and record chemical usage. Record run tracking information. Accurately release synthesized runs and flag remakes in database GUIs. Inform oncoming operator of run and instrument status. Seeks assistance to maintain acceptable cycle times.*Safety - Wear appropriate PPE. Inform supervisor of potential safety hazards. Properly dispose of waste and hazardous materials. Follow all safety HSandE guidelines.*Problem Solving and Job Knowledge - Identify major synthesis problems. Knowledge of DNA synthesis chemistry. Trouble-shooting prior, during, and after synthesis run. Understanding of production database and synthesis software.*Adaptability - Learn and apply new skills within expected time periods. Adapt quickly to changes in processes and protocols. Accept criticism and feedback concerning work performance. Prioritize tasks to reduce cycle times.*Cooperation - Assist and offer support to co-workers. Maintain a positive and pleasant manner. Resolve conflicts within a timely manner. Exhibit tact and consideration to all employees.*Process Improvement - Submit ideas for cost and resource reduction. Provide detailed feedback on testing of new processes. SKILLS:*3 O-Level (or equivalent) passes including Mathematics and English*Desirable: A-level (or equivalent) pass in an appropriate subject*Some experience of working in a similar environment (manufacturing and/or laboratory)*Some involvement in process improvement *Some knowledge of ISO or similar QMS*Proficient in the use of personal computers*Knowledge of lean manufacturing techniquesThe hours are 3-11 Sunday to Thursday. Salary 14,500 to 15,500 plus shift dependent on skills and experience. http://www.polytec.co.uk/jobs/production_technician_-_nights_21066.html Thu, 21 Aug 2008 15:01:19 GMT Our client is currently seeking an Engineering Fitter (Mechanical) to safely complete assigned work in an efficient and cost effective manner. Ensures that Engineering Systems are accurately maintained and contributes towards their improvement in a proactive way.MAIN DUTIES*Undertakes reactive/corrective Engineering repairs.*Completes planned proactive/preventive Engineering Schedules centred on planned annual plant shutdowns. SKILLS:*Mechanical apprenticeship achieving City and Guilds qualification or equivalent*Fault finding expertise*Chemical industry experience*Background in gearbox/pump type work not just pipefitting*FLT driving experience*IT Systems and Business Processes used in the role: e.g. BW, SAP Fico etc. *SAP PM module to a limited degreePackage includes 25 days holiday + Bank Holidays, Group Personal Pension Plan - (part employee/employer contributions) with a maximum employer contribution of 10%, Company paid health care and an annual bonus. Working hours = Mon - Thurs 8.00am - 4.45pm and Fri 8am - 3pm. The Fitter would be on call outside of the core work hours for a 7 day period every 6 weeks. They would be required to be able to return to site within 1 hour of a call, in a condition fit for work. They will be paid a minimum 4 hours overtime for this response. But the 'standby retainer' is included in his basic wage. http://www.polytec.co.uk/jobs/engineering_fitter_21063.html Thu, 21 Aug 2008 11:01:08 GMT Our client is currently seeking an Operator to provide operational support within the test group as instructed by the Test Engineer. This involves the assembly and testing of test cell devices.MAIN DUTIES:*Device assembly of spin coated test cells (P-OLED and OTFT)*Standard Unibench, IVL and lifetime testing of spin coated test cells (P-OLED and OTFT)*Tracking devices through the testing system*Test substrates via automated inspection tool and visual inspection*Visual inspection for defects*Electrical screening for predicted shorts*IVL measurements as required*Photography as required*EL Spectra measurements*Reliability testing*Use of automated lifetime systems*Device cleaning including use of automated cleaning system*Pinning of devices and test cells*Stock checking *Database support KNOWLEDGE/EXPERIENCE/SKILLS REQUIRED:*HNC/HND/Degree or 1 year experience in a laboratory environment *Windows NT and Microsoft Office products is highly desirable as these will be used on a daily basis*An ability to work unsupervised for long periods without losing touch with the aims of the team*An ability to provide quality and timely feedback to relevant parties any anomalous observations*A calm and methodical approach to work during busy periods*Ability to work on several batches of work simultaneously without loss of efficiency or productivity*An ability to react quickly and appropriately to changing priorities and unexpected demands*A willingness to liaise with external customers and suppliers on a regular basis*You will be working rotating morning and evening shifts. The hours are relatively flexible if necessary, for example, 9 till 2 or 11 till 4 if it helps. This would be 25 hours per week in total. The salary for this role is NEGOTIABLE. http://www.polytec.co.uk/jobs/operator_part_time_21056.html Wed, 20 Aug 2008 14:01:08 GMT Our client is currently recruiting a System Test Engineer to participate in system testing, using own expertise and knowledge from other team members to:Propose, plan, implement and interpret test programmesThe main side of this job will be to participate and take leading role in field trials of instrumentsDiagnose system performance issues, propose and implement solutions and improvementsMAIN DUTIES: *Be part of the team designing, building and testing gravity gradiometer instruments.*Develop understanding of the operating principles and physics of the EGG gravity gradiometers sufficient to propose, implement and interpret test programmes.*Participate as part of the team in the system testing, with emphasis on diagnosis, understanding and solution of problems to maintain overall progress.*Propose and lead investigations into new concepts for EGG systems to improve performance, reliability or ease of manufacture.*Lead further development of existing test techniques to speed or simplify test programme.*Provide expertise in physics, numerical and analytical techniques to support all aspects of the team's activities.*Monitor the predicted and actual performance of system, technology and component trials and identify opportunities for design and process improvements.*Establish and maintain effective working relationships throughout the business, in particular liaise with peers in similar roles to gain benefits of common practices.*Maintain professional awareness of external developments in techniques and processes and identify where these may be used to benefit the business.*Be aware of and ensure compliance with Health and Safety policy and proceduresDESIRED SKILLS:*Relevant physics, applied mathematics or engineering degree or well qualified through experience *Postgraduate degree*Experience Academic research, industrial RandD or new product development - involving use of analytical tools. *Experience of complex instrumentation, superconductivity and low noise systems, gravity gradiometry.*Computer literate*Computer simulation*Analytical techniques*Application of physics knowledge to complex problem solving *Low Temperature electronics*Low frequency measurements*Cryogenics, superconductivity or SQUID systems*Low noise techniques*Closed and open loop control systems*Instrumentation on moving platforms, vibration isolation.*Integration of instrumentation with aircraft, airworthiness procedures*Analysis of noisy data http://www.polytec.co.uk/jobs/system_test_engineer_21033.html Tue, 19 Aug 2008 10:01:08 GMT Our client is currently seeking a Production Engineer, this is a career opportunity in a rapidly expanding business for an experienced Production Engineer. Our client is looking for a 'hands on', organised production engineer who has experience of working with good production methods and best practices. The principal responsibility of the role is to ensure that production has been set clear targets and that they are consistently being achieved. MAIN DUTIES:*Establish daily targets for production output*Develop standard work and training procedures*Implement improvements to existing work instructions and develop continuous improvementSKILLS:*Technical background in a manufacturing/engineering environment*Ability to read, create and modify engineering drawings*Ability to create and maintain detailed work instructions*Excellent communication skills *Computer literate] http://www.polytec.co.uk/jobs/production_engineer_21016.html Thu, 14 Aug 2008 15:01:08 GMT Our client is currently seeking a Design Engineer. This position involves assisting in providing mechanical design and production support and being part of the development team. MAIN DUTIES:*The development of new instrument designs to a production stage. *To test designs "hands on". *To assist in the specification, design and development of mechanical parts. *Preparation of clear and traceable design documentation, from specification to *validation and to maintain the drawings and other design information *Providing data for technical manuals. *To assist with any production testing issues related with mechanical aspects. QUALIFICATIONS:*To good degree level in mechanical engineering or relevant subject.*Post qualification industrial experience is necessary EXPERIENCE:*Instrumentation *Precision optical assemblies *Enclosures *Approvals *Ability to work with minimum supervision is an advantage -------------------------------------------------------------------------------- http://www.polytec.co.uk/jobs/design_engineer_21012.html Thu, 14 Aug 2008 13:01:07 GMT Our client is currently seeking a Product Manager to join their Wire business unit.MAIN DUITES:*To produce technical information incorporating features and benefits of flux cored wires produced within the wire business unit.*To provide technical support within the territories to subsidiaries, distributors and end users*To define the product range and applications in order to meet sa