View 54 Electronic Engineering jobs on the Polytec Personnel website en-gb Copyright: (C) Polytec Personnel 180 Working in a highly creative, technical environment, you will have a leading role in contributing to solutions on a wide variety of medical device projects, from the initial concept and analytical stages through to prototype delivery and manufacturing introduction.You will also have the opportunity to contribute to a wide range of technical projects in other industry sectors.To be successful, you will have strong creativity with a good understanding of this industry sector gained through firsthand experience of medical device development. You will be able to lead or contribute to multi-disciplinary teams working in a wide range of technical disciplines, and be able to deliver demanding projects to high quality, on time and on budget. You must be self-motivated, comfortable with presenting your work and ideas to clients and highly adaptable.You will ideally have:- 1st or 2:1 from a leading university in Engineering or Physics- Strong creativity coupled with an analytical and enquiring mind- Excellent communication skills- Experience in an appropriate sector of medical devices gained either in industry or in a consultancy http://www.polytec.co.uk/jobs/medical_devices_engineer_23017.html Fri, 23 Jul 2010 16:01:08 GMT Summary of responsibilities:Developing and continuously supporting a highly efficient and technicallysuperior optical fibre termination production capability, for specialized fibre optic applications including data, telecoms harsh environment and industrial applications. Reporting to the Production ManagerMinimum Experience/Education:It is essential that the candidate is highly self motivated and can workeffectively under minimal supervision.BS+ in mechanical engineering, physics, fibre optics etc.5-8 years of Fibre Optics related experience, in particularin connectorization/termination/harnessing for enterprise/data-centre/military/telecom applications including common and specializedsingle and multi-fibre productsStrong knowledge of optical fibre end face polishing techniques, cleavingprocesses, and optical testing including automationFamiliar with F.O. packaging technologies.Opto-mechanical expertise is preferred.Knowledge of copper CAT- 5 + other copper enterprise products usefulbut not essential.Ability to work effectively and multitask within a strong team often under very tight time-lines and commercial pressures within a small high growth rate company environment.Capacity to organize a production area, identify and procure equipmentto maximize outputsAbility to train, organize and lead a team of techniciansGood communication skillsProven effective problem solving and project management skills http://www.polytec.co.uk/jobs/fibre_optic_assembly_production_engineer_23006.html Thu, 22 Jul 2010 12:01:07 GMT Your role will be to provide maritime focussed training to customers worldwide. The applicant will need good fundamental radar knowledge in both operational and operational terms. Good presentation skills, an outgoing personality and the ability to travel worldwide for periods of time are also required.Employed within a full EW Specialist role acting as the Radar ESM Specialist in all matters pertaining to Radar ESM Electronic Warfare. You will also be the main focus for all UKTI, DDefSy, Central Government and oversee and advise on all external 3rd Parties specialist software provision agreements pertaining to RESM.You must be able to work for long periods, unsupervised and must be able to make informed decisions on a case by case basis and be completely trustworthy in all aspects of the tasks at hand.You will become a member of a close knit team and at times be required to operate outside your comfort zone and be able to show flair and imagination but above all – flexibility towards achieving the aims and goals for our client. You will be involved in all city activities and will act as the RESM PoC for any high level discussions and all high level future development discussions. You will report for MSc purposes to the MSc Coordinator for all such matters.You will be required to enhance current EW and RESM focussed course material, create new material for EW as well as hands on delivery role within the EWSOC and Radar ESM sphere of EW.SKILL AREA MANDATORY SKILL REQUIREMENTS DESIRABLE SKILL REQUIREMENTSA good overall understanding of EW across all aspects of the Maritime and Land environmentsStrong operational Navel Radar (ESM) experience and a successful military career a necessityWell organised, realistic and reliableAssertive and dynamic Appreciation of the Air EW environmentRoyal Navy Communications Technician / EW Staff OfficerGCHQ / NSA knowledge of operations Exposure of EW training simulations including software such as EWSSELINT Analysis Tools experienceRESM/EW Database experiencePersonal Qualities Effectiveness both as a leader or team memberShares information and knowledge with colleaguesExcellent communication skills, both written and oralHigh degree of self-motivation, honesty, integrity and trustworthinessOrganisationally aligned, assertive and dynamic “team player”Success oriented and focused to delivering services to end customersHighly client focused with an attention on qualitySpecific Skills In depth knowledge of ELINT analysisDetailed understanding and experience of RESM Focussed Operations Knowledge of complex signals collection and analysis an advantageMarkets - Commercially aware and sales mindedKnowledge of the UK MoD Procurement procedures (DEandA / IPTs etc)Knowledge of the Royal Navy and Tri Service Training Establishments (HMS Collingwood and JSSU Chicksands) Other Successful and demonstrable full military EW career experience mandatoryGood presentation skills Experience in EW training provision designEnergetic and willing to be part of a flexible specialist team.OTHER INFORMATIONRequired start date: ASAP Start Date:Salary range: up to £40K depending on experience http://www.polytec.co.uk/jobs/consultant_radar_trainer_23004.html Wed, 21 Jul 2010 17:01:07 GMT Our client is seeking a Senior Test Automation Engineer to join the team. Your role will involve testing embedded software and tools across our client’s product range as well as implementing new automated functional test and improving upon the current tool set. You will provide test metrics, manage testing frameworks and regression suites and promote continuous improvements in system level automated testing of our client’s products.You will be required to investigate and report on issues found during automated testing as well as increasing automated test coverage by converting existing manual tests to automation. DESCRIPTION OF PERSON (Main skills, personal attributes):You will be passionate about test and the uncovering of defects as early in the development process as possible Strong analysis, numerical, written and verbal communication skillsWide knowledge of available test automation tools Ability to demonstrate previous experience of automating existing manual tests and defining new tests from requirementsTenacity and an ability to probe issues and understand the root causesAbility to work to a high level of quality and detailConfidence and ability to recognise short-falls in process and suggest improvementsInnovative with respect to new automated testing initiativesFlexible approach to working in a transient, project-based environmentCan do attitude, robust and able to cope with a broad based and demanding briefOrganised and structured way of workingAble to deal with other engineers and managers of all levels http://www.polytec.co.uk/jobs/senior_test_automation_engineer_22998.html Mon, 19 Jul 2010 17:01:06 GMT OVERVIEW : Responsible for creating and developing solutions to technical problems, generating Intellectual Property for our client and adding value for their commercial exploitation and consultancy partners. Required to live up to the core values of 'technical excellence', 'trust' (safely placed in our client by its partners), and 'radical' (innovative approach to technical and business matters). Expected to work in a professional, efficient, and organised manner, both alone and as part of a team, communicating clearly internally and externally. MAIN DUTIES: To carry out tasks as required within the scope of the role, including:• research and development of commercially valuable technologies.• identifying markets and companies with whom our client can create and develop ideas or products,• building and maintaining relations with individuals and or companies who may value their services,• managing projects and budgets,• preparing proposals, reports, presentations etc., for potential and actual clients,• travel to client’s premises or other meeting venues either within the UK or abroad. • be able to maximise opportunity to continue client relationships and develop new business, both through existing and new clients.To comply with formal requirements such as:• adhering to Health and Safety requirements and other relevant rules and regulations,• being familiar with and following the Company Handbook, • completing forms and timesheets,• so far as possible, following standard company operating procedures, • being answerable to one’s Line Manager and the Managing Director. COMPETENCIES: Essential: • An outstanding understanding of applied physics and engineering principles.• Creativity and problem solving skills.• Good mathematical/analytical skills.• Self motivation and an ability to operate with minimal supervision Desirable: • Expertise in analogue and digital electronics.• Knowledge of design for manufacture and manufacturing processes.• Power electronics design• Commercial experience, especially in a consultancy or engineering context.• Proven experience of selling technical consultancy.• Practical laboratory or workshop experience. QUALIFICATIONS• A good first degree (2.1 or above) in engineering or a related subject from a top University. • A higher degree (PhD) is advantageous, but not essential. http://www.polytec.co.uk/jobs/technology_developer_-_applied_physics_22992.html Thu, 15 Jul 2010 13:01:08 GMT Our client is seeking to recruit a Field Engineer to join their team. The role is a combination of system installation, commissioning and customer support, for both customer and our client’s operated networks together with operations and support of their own hosted networks. It will be both field and office based. There may also be opportunities to assist the development team with system test.The role will be broad and will need someone who is prepared to get involved in a wide range of different engineering disciplines from radio system deployment to database and web software, and from practical hands on engineering in the field to providing customers with training and support or defining and writing operations documentation. It will involve some weekend 'on-call' support.You are likely to have all, or at least many, of the following skills and experience:• An engineering degree• Experience of design, management or test of large IT systems• Experience of design or deployment of communication infrastructure• Customer support of IT or communications systems Specific technical experience of the following area will be considered an advantage:• Linux network management• Database and web based systems (we use Firebird and apache)• Radio systems design, planning or deploymentYou will be:• An enthusiastic team player, but be able to work independently• Prepared to do what is required in a small start up company environment • Be prepared to learn new skills as necessary• Have good communications skills, and be prepared to work in customer facing roles• Have good organisation skills The job will involve visits to customer sites and may include international travel. http://www.polytec.co.uk/jobs/field_and_operations_engineer_22987.html Wed, 14 Jul 2010 16:01:06 GMT The client is seeking a new Product Cell Leader who will report and work closely with the Production Manager to achieve productivity and project targets of the Cell.JOB DESCRIPTION:Key Duties/Responsibilities* Responsibility for the achievement of specific targets that are set for each of the cells on a daily, weekly and monthly basis.* To liaise with the Production Manager and other Cell Team Leaders on Technical issues as well as staff resource and general supervisory tasks.* In conjunction with the cell staff resource, to control the component stock levels within the cells under their management to ensure there is adequate stock of components to complete production and achieve targets.* To complete and maintain the 5S and Lean Manufacturing processes in a schedule as set out by the Production Manager.* To closely monitor the quality of all product built within their product family and ensure the quality targets are met as set out by the Production Manager* To ensure that all measures as set out by the Project Schedule are met on time, in full and with attention to detail that will ensure the quality of the process.* To ensure safe working practices are adhered to at all times and comply with their responsibilities under the Company’s Health and Safety policy.* To apply a flexible and innovative approach to the day to day operation of the cell with the main focus on production targets but not restricted to that single focus.Skills/Experience * Degree level qualification or relevant experience in an engineering discipline* experience of people management will be required; the post-holder will need to demonstrate the ability to motivate and manage a group of 6 or more employees* Relevant experience in the assembly of instrumentation or low volume multi-technology products* knowledge of production planning methodology as suited to each cell* experience in project management of complex technically based projects* good verbal and written communication skills* Proactive, enthusiastic, role-model who demonstrates a commitment to Company values, shows initiative and is self motivated* The post holder will be required to demonstrate an understanding of the Health and Safety requirements as applied to Production. http://www.polytec.co.uk/jobs/production_cell_leader_22981.html Tue, 13 Jul 2010 17:01:06 GMT Electronics Production TechnicianMain purpose of the jobTo work with our design engineers and our PCB CAD technicians to offer a complete prototype and small-volume electronics manufacturing service.Type of work undertaken by the groupThe Electronics Production Group offers PCB design facility, and a manufacturing facility for building PCB assemblies and complete products in low and medium volumes. The group undertakes schematic capture and PCB layout using Mentor Graphics; and PCBA manufacture using automated pick-and-place PCB assembly and vapour phase re-flow soldering. We aim to provide an end-to-end PCB design and product manufacturing service, including: * Design for manufacture (DFM) services to our project teams * PCB Design o library part entry and checkingo schematic capture - PCB layout* PCB assembly o Solder paste screen printingo Pick-and-place programming and assemblyo Reflow solderingo Wave solderingo Hand soldering (assembly, repairs and design modifications)* Inspection* Final assembly o enclosure preparationo electro mechanical assemblyo wiring harness* Functional and production testing Specific responsibilities As a part of the Electronic Production Group, you will be involved in the following aspects of the manufacture of PCB assemblies and complete prototypes:* Component Sourcing and Purchasing* PCB and Electro mechanical assembly* PCB rework and modification (both SMT and through-hole)* Operation of automated electronic manufacturing equipment* Machine maintenanceMinimum requirementsRelevant and comprehensive experience in executing the job responsibilities detailed above.In addition, some experience with some / all of the following would be beneficial but training will be provided where necessary:* Working to IPC-A-610 Electronic assembly workmanship standards* Automated Pick and Place machine programming and operation (Mydata MY9)* Screen printing (DEK Horizon 03i)* Inventory management and control* Good working knowledge of a prototype manufacturing environment* Working knowledge of circuit diagrams A background in production engineering and knowledge of surface mount PCB assembly, including fine-pitched components, BGAs, board construction, via technologies and small passives (0402 / 0201) would be beneficial.            Ideally you should have a qualification in electronic engineering, e.g. HNC, although experience in lieu of qualifications is acceptable. Also, an IPC recognised certification and / or knowledge of IPC standards will be an advantage. http://www.polytec.co.uk/jobs/electronics_production_technician_22970.html Wed, 07 Jul 2010 16:01:07 GMT Our client is seeking a Senior Customer Support Engineer, reporting to the Senior Engineer Manager, to provide specialist customer support to the field base of high end machines worldwide.Principal Responsibilities: 1. To deliver effective on-site specialist technical support of clients products in the field service2. To carry out routine maintenance and upgrades of client’s products3. To install products and where required deliver customer training and machine minding4. To carry out machine audits and prepare reports on findings5. To carry out site-surveys and prepare reports on information gained6. To offer show support of products where necessary7. To report machine issues and newly encountered problems to the Technical Liaison Engineer as they ariseContact with others:1. Customers, Partners and Distributors2. Customer Support Team3. RandD and Production StaffKnowledge and Experience:1. Substantial experience in a field service engineering role in an international business2. HND/First Degree level or equivalent in Electronics/Electrical/Controls engineering3. IT skills – Microsoft Office suite, Lotus NotesCompetencies: 1.1 Deciding and Initiating Action2.1 Working with People3.1 Relating and Networking4.2 Applying Expertise and Technology5.1 Learning and Researching6.2 Delivering Results and Meeting Customer Expectations 6.3 Following instructions and procedures7.2 Coping with Pressures and Setbacks8.1 Achieving Personal Work Goals and Objectives http://www.polytec.co.uk/jobs/senior_customer_support_engineer_22962.html Fri, 02 Jul 2010 12:01:07 GMT Our client is seeking a Mechanical Assembly Technician to join the team on a permanent basis.The function of the role is to provide a flexible approach to Production support with focus on Assembly, Test and Despatch Areas.Key Responsibilities:• Electro/Mechanical assembly• Providing feedback to improve quality and product build• Ensure the preparation shelf is fully stocked and maintained• Provide assistance in the packing and despatch of instruments• Provide assistance to the Test DepartmentSkills and Experience • Electro/Mechanical assembly experience and the reading of mechanical drawings advantageous• Computer literate with knowledge of Word/Excel/Outlook• Electronics background useful but not essential• Previous exposure to production/test environment would be helpful Terms and Benefits • Probationary period of 3 months• Permanent position following satisfactory completion of trial period• BUPA and PHI available• Contributory private pension scheme availablePersonal attributes:• Takes responsibility for completion of tasks with attention to detail• Flexibility in approach to tasks (beneficial in helping across departments in the Production Area)• Positive and enthusiastic• Helpful and willing• Inquisitive• Reliable http://www.polytec.co.uk/jobs/mechanical_assembly_technician_22960.html Fri, 02 Jul 2010 10:01:07 GMT Our client is seeking bright, ambitious electronic engineers to create, analyse and develop new technology. The successful candidates will be expected to make a solid contribution to a group with core business in diagnostics, bio-instrumentation, surgical technology and other high-end applications. You will be expected to:- Immediately engage in a technically challenging and stretching environment- Contribute to and lead demanding medical projects within a talented team of like-minded people- Be client-facing with excellent communication and presentation skills. You will have:- A 1st or a 2.1 degree in electronic engineering- Intrinsically high levels of motivation- Significant track record of designing analogue, digital and wireless electronic systems with a good understanding of low-level circuit operation- Experience in developing wireless systems, antennas, embedded software and diagnostic devices in a regulated development environment would be an advantage- Hands-on technical leadership and project management capabilities- Outstanding technical capabilities combined with commercial awareness http://www.polytec.co.uk/jobs/electronics_engineer_22946.html Fri, 25 Jun 2010 11:01:07 GMT The Qualifications- Hardware Design Engineer with a 1st or a 2.1 degree from a good university- In-depth experience developing wireless products through to market- Clear understanding of RF systems, circuits, and simulation techniques, kHz to GHz, including VCOs, synthesisers, gain stages, mixers, LNAs, power amplifiers, antennas, etcPractical experience of broader electronics development activities, such as:- Embedded hardware development using microcontrollers- Switched mode power supply design for battery operated systems- Low power analogue and digital design- FPGA- An understanding of the commercial aspects of technology development, including a sound appreciation of cost-sensitive product design.The Role- System-level thinker, creating detailed specifications and system architectures from basic market concepts- Adaptable and creative technology practitioner, revelling equally in circuit level design and getting the details right;- Problem-solving team player, quickly adapting to diverse project demands- Highly motivated, skilled communicator. http://www.polytec.co.uk/jobs/radio_design_engineer_22932.html Mon, 21 Jun 2010 17:01:07 GMT Qualifications/ experience required- Significant experience of assembling scientific instruments or other precision products- Ability to perform basic testing and problem solving- Ability to work accurately to procedures to produce work of consistent high quality- Ability to liaise with design and development engineers- Basic computer literacy- (A background in tool making and competence in fine tolerance manual milling and turning would be an advantage)The Role- Working flexibly within a small manufacturing team, building and testing a varied range of low-volume, precision products for laboratories and the pharmaceutical industry- Producing high quality work with minimum supervision to achieve deadlines http://www.polytec.co.uk/jobs/scientific_instrument_assembler_22923.html Wed, 16 Jun 2010 10:01:06 GMT Our client require an ECAD engineer to support development engineering with schematic entry, PCB layout and library management. The candidate will work as part of the development team, providing technical advice in respect to the most appropriate PCB technology to use for each design, and work closely with the procurement and NPI teams to allow them to place boards into manufacture and assembly. The candidate will have experience and a thorough understanding of the requirements for high speed digital, analogue, power supply and RF PCB designs, as well as a good understanding of EMC / EMI layout considerations and DFM / DFT requirements for low, medium and high volume production. The role will require the use of the Mentor Expedition PCB layout tools and DxDesigner/DxDataBook for the schematic capture. The candidate will be expected to maintain the CAD library and assist with maintaining the EDM / PDM system. They will also be expected to be able to read and understand mechanical drawings and have experience in designing PCB’s to fit into “off the shelf” or custom enclosures and be able to work alongside mechanical designers to achieve the most cost effective solution to product packaging. Key Responsibilities:- Schematic entry into Mentor DxDesigner- Mentor Central Library maintenance, including the creation of new schematic symbols, PCB pad stacks and footprint cells- PCB Layout using Mentor Expedition- Manage existing project folders, create new revisions or new projects as required- Provide technical support to the development teams so the appropriate PCB technology can be identified at an early stage in the design process- Provide support to PCB fabricators to ensure the boards can be made as cost effectively as possible and to the timescales required- Ensure all PCB’s are designed using appropriate DFM and DFT standards, and work alongside the Procurement team to provide Part Lists information and assembly data as requiredThe candidate is likely to have the following skills:- Experience in high speed and/or high complexity digital circuit layout- Experience in analogue and power supply circuit layout- An understanding of the requirements and considerations of RF circuit layout- A good understanding of EMC and EMI layout considerations- A very good understanding of PCB fabrication techniques and technology- A good understanding of the PCB assembly processed and impact on layout- High levels of proficiency in schematic entry and component library/database management- Knowledge of thermal design considerations and PCB implications- Understanding of quality practices and design revision managementPreferred Skills:- A basic background in electronic design is highly desirable, mechanical design or MCAD experience would prove an additional advantage http://www.polytec.co.uk/jobs/ecad_engineer_22918.html Tue, 15 Jun 2010 11:01:07 GMT Our client is looking for a Test Technician who is familiar with working in an electronics development lab alongside design engineers. The test technician will carry out component and prototype product testing and fault finding under the guidance of development or NPI engineers as required to verify required performanceThe role will require the use of many different types of electronic instrumentation including spectrum analysers, oscilloscopes, PSUs, and network analysers as well as the use of tools for hand modification of surface mount PCBs with part sizes down to 0201.Key Responsibilities:- Test and debug of prototype assemblies following instruction by development engineers- Debug and repair of prototype assemblies damaged during development and application testing- Hand modification of electronic and mechanical assemblies as required (note: this role is not an assembly technician)- Maintain accurate records in an agreed format of all debug and test activities- Review test and debug results and present summaries- Participate in development project meetings and reviews- Maintain an organised and tidy work area and understand good lab working practices- Identify process improvements and contribute to process documentation where applicable- Documentation of test methods and the hardware required to support the testing of productsThe successful candidate will have most of the following skills / experience: - Familiar with lab test equipment, spectrum analyser, oscilloscope, computer literate etc.- Able to follow instructions and capable of and willing to carry out repetitive tasks to a high standard- Able to read a circuit diagram and make modifications to circuits as per instruction- Has a disciplined approach to the execution of tests and keeping of records relating to activities- Has clear spoken and written communication skills- Likely to have worked with prototype products, test fixtures and demonstration boards- Has demonstratable experience of performing troubleshooting, test and repair of prototype and pre-production products in a product development environment- Is likely to have an electronics HND or similar- Will possess a good understanding of both Analogue and Digital Electronics- Will be able to modify boards to component level- Will demonstrate a high level of initiative and be able to work independentlyPreferred Skills:- Has worked in similar environments in the past i.e. with prototype products, test fixtures and demonstration boards. http://www.polytec.co.uk/jobs/pcb_test_technician_22917.html Tue, 15 Jun 2010 11:01:07 GMT Our client is looking for an analogue and mixed signal system design engineer to help develop its power supply modulator products. This role involves taking concepts, turning them into novel architectures, and creating IC specifications that can be designed in Silicon.Relevant experience:- Strong understanding of control theory- DC/DC converter design- Switching Regulators- Agilent ADS- Matlab and Simulink- VerilogA – possibly within a Cadence environment- Specification for IC designThe candidate must be ‘system’ creative to develop system architectures to solve complex high speed power modulator problems. These architectures then need to be broken down into practicable blocks and specified. Specification will have to be achieved in partnership with the IC design team to ensure a realisable solution. All aspects of IC design have to be considered in developing the specifications, so previous experiencing in bring complex analog systems through from concept to real silicon is essential.System modelling will occur in a variety of tools, but the company is moving towards top level IC modelling in VerilogA, so this is essential.An understanding of RF transmitter design would be an advantage as a number of top level requirements are RF system driven, and the company’s modulators interface directly with a Tx power amplifier. http://www.polytec.co.uk/jobs/ic_systems_engineer_22916.html Tue, 15 Jun 2010 11:01:07 GMT The Role- Engineer in technically demanding embedded hardware and firmware projects across a wide variety of industries- Participate in client interface, communication and technical programme lead- Contribute to the growth of the Applied Technology business. The Qualifications- Hardware/Firmware Engineer with a 1st or a 2.1 degree- Track record of hardware electronics design with advanced processors and FPGAs- Experience of system level design- Working knowledge of C/C++ in embedded applications http://www.polytec.co.uk/jobs/hardware_firmware_engineer_22906.html Tue, 08 Jun 2010 14:01:07 GMT Main purpose of the jobAs a Digital Hardware/ASIC/FPGA design engineer you will work on state-of-the-art wireless systems, from concept definition through ASIC / FPGA and board-level circuit-design, to transfer to volume production. The role offers a high level of diversity through the application of the very latest wireless technology to a wide range of market sectors. Specific responsibilities In this role you will be responsible for:Specification and system design of new productsASIC and FPGA design and verificationBoard-level digital circuit design Review and guidance for PCB layout Working at all times as part of a close-knit multi-disciplinary project team focussed on delivering the design solution to our client Technical contribution to proposals and quotations for new development projects Creating novel design solutions that will be of value to our clients Minimum requirementsWith an appropriate background working for an electronic design or IC design organisation, you will have significant and relevant experience of digital ASIC or FPGA design as well as design of board-level circuits. A good degree in electronic engineering or a related discipline is also required along with excellent oral and written communication skills. Knowledge of any of the following areas would be an advantage: High-speed digital board designDSP implementation in hardware An understanding of radio system architecture An appreciation of analogue design techniques Experience of the following tools would be valuable: Synopsys VCS Verilog Synopsys Design CompilerSystem Verilog Synplicity Synplify ProXilinx and Altera FPGA Place and Route http://www.polytec.co.uk/jobs/digital_hardware_asic_fpga_design_engineer_22899.html Thu, 03 Jun 2010 15:01:06 GMT Overall Objectives: Engineering operations including machine setting, equipment maintenance and plant maintenance. The job will involve working a 2-shift pattern: (6am-2pm and 2pm-10pm). Key Duties and Responsibilities: - Cost effective set up of production lines to achieve pre-determined efficiency levels- Timely response to breakdowns to minimise downtime- Continuously improve production line efficiencies- To carry out planned maintenance schedules- To operate within the required company and legislative health and safety standards- To update engineering record systems- Work in a manner which prevents contamination of the product. Qualifications/Experience Requirements: (1) Time served electrician, conversant with the IEE 16th Edition Regulations. 2 years+ in a maintenancerole (2) Time Served tradesman in a mechanical discipline. 2 years+ in a maintenance/machine setting role. (3) Practically minded machine operator with at least 3 years experience in the food processing/packagingenvironment. http://www.polytec.co.uk/jobs/maintenance_engineer_22876.html Mon, 24 May 2010 12:01:07 GMT Key Accountabilities- Conduct testing in accordance with established procedures, maintaining a high standard of service delivery that ensures effective customer relationships- Complete all assigned chargeable work within the required timeframes, Provide technology support - Ensure completion of all assigned work and relevant documentation in accordance with required procedures and standards to fulfil quality requirements- Assist in maintaining UKAS ISO17025 accreditation - Provide test system management, maintenance and calibrations to ensure compliance with the quality system- Represent company at global certification meetings- Maintain the laboratory and personal areas to facilitate efficient operations- Ensure full compliance with the Company’s Code of Integrity and Professional Conduct, and at all times adopt behaviour in accordance with Equality and Diversity policy.Current Challenges and Opportunities- To become multi-skilled and competent on multiple test system- Development of advanced GSM knowledge and other wireless technologies- Understand GCF and PTCRB and other certification schemes- To assist in the expansion of existing scope of accreditation for UKAS- Flexible working to deliver clients projects Skills and KnowledgeEssential- Excellent communication skills- High level of accuracy and good presentation skills- Able to work effectively as a team member- Ability to supervise/mentor technicians- Ability to prioritise workload and meet deadlines- Effective working knowledge of Windows associated packages (MS Office etc)- A broad level of GSM/WCDMA/AE/wireless knowledge with a detail knowledge in a particular area- Ability to interpret specifications documents to satisfy customer requirements- A detailed knowledge in several of the following areas GSM/WCDMA/AE - Use of test and measuring equipment e.g. Multi-Meters, oscilloscopes, etc and Test Procedures- Must have a working knowledge of 3GPP standardsExperience Essential- Minimum of 3 years experience with providing technical services in a customer driven environment- Willingness to learn and adapt to change – committed to continuous personal and professional development- Minimum of 2 years experience on radio or wireless technologiesDesirable- Knowledge of GSM/WCDMA conformance testing- Understanding of validation services for test equipmentQualificationsEssential - HNC/HND Qualification in EngineeringDesirable- Degree in Engineering http://www.polytec.co.uk/jobs/test_engineer_22865.html Tue, 18 May 2010 15:01:07 GMT Our client designs and manufactures high end precision micro joining products and systems - low volume, high value, designed with the latest mechanical, electronic and electrical technology available and range from standalone joining products to fully automated manufacturing systems employing robotic and vision systems.They are seeking a dynamic, hands on project leader/engineering manager to oversee development projects and to play a practical, hands on role in the product design and specification. Running a team of six engineers, the likely candidate will have at least 10 years relevant experience in an embedded electronic product development environment with confidence and management skills to contribute at all levels across a wide range of engineering fields.Experience and qualifications in some or all of the following subject areas would be particularly useful:-Embedded Windows CE developmentMS Visual Studio .NETEmbedded microprocessor design – 8 through to 32bit systemsC programmingAnalogue and digital design skillsPower Electronic design – High power, high voltage, switch modeProject ManagementMan managementUseful skills: 3D mechanical design with experience of AutoCAD Inventor Mechanical modelling. http://www.polytec.co.uk/jobs/embedded_engineering_manager_22863.html Tue, 18 May 2010 22:01:07 GMT Due to our client's expansion, they are recruiting for a Technical Specialist to work in their customer service department. The Company strongly believes that nurturing and developing customer relationships are central to their success and future in the highly competitive test and measurement marketplace. This position plays a pivotal role in the Company. As the customers’ first point of contact, you will have excellent communication skills, with the ability to lead the customer through product selection or give a solution to a technical issue using uncomplicated vocabulary over the telephone, internet forum or by email. The ability to think on your feet and be able to quickly resolve technical questions in a confident and tolerant manner is essential. Due to the technical nature of our client’s products and customers, you will have a technical background and possess a good understanding of electronic and software products. Previous experience using oscilloscopes, general electronics or software design would be an advantage. In addition, the ideal candidate will have a familiarity with software packages such as LabVIEW, MATLAB, C/C++/C#, VB and Linux for controlling test instruments.The role will involve assisting customers to install software, setup their equipment and resolve technical issues. Expert knowledge of the Company’s products is therefore essential and full product training will be given. The role will also include helping to test and evaluate new products and software updates as part of the Company’s on-going development commitment. Main duties:• Provide after-sales technical support to existing customers using telephone, email and forum for our client’s oscilloscope and data logger products• Assist customers in selecting the correct product for their application • Record and investigate software and hardware bugs reported by customers• Attend exhibitions, present distributor training and customer demonstrations as required Skills and experience:• Ability to identify customer requirements and resolve technical queries with confidence• Previous experience in electronics and/software would be an advantage The ideal candidate will:• Possess knowledge of programming environments such as LabVIEW, MATLAB, Visual Studio (C#, C++, VB)• Have a broad understanding of oscilloscopes, data loggers or other electronic measuring instruments http://www.polytec.co.uk/jobs/technical_specialist_22854.html Mon, 17 May 2010 13:01:06 GMT Our client is looking for an RF and microwave IC design engineer to join their RF IC group. You will ideally have experience in the design of MMICs in GaAs technology. However, applications are also invited from candidates with Si RF IC or component level microwave PCB/MIC design experience. Successful candidates would be expected to design in a range of technologies including:GaAs MMIC SiGe IC Multi-Chip Modules (MCMs) SMT based design at RF and microwave frequencies to component level RF and microwave PCB/MIC using various substrate technologies including HDI FR4, thick and thin-film ceramic, LTCC Experience in some of the following areas would also be an advantage:Communications system design IC packaging technology RFOW test High power microwave amplifier design Passive component design (filters, couplers, baluns) Low noise synthesiser design Digital modulation schemes http://www.polytec.co.uk/jobs/rf_microwave_ic_design_engineer_22851.html Fri, 14 May 2010 17:01:07 GMT OVERVIEW : You will be responsible for creating and developing solutions to technical problems, generating Intellectual Property and adding value for commercial exploitation and consultancy partners. You will be required to live up to the core values of 'technical excellence', 'trust' (safely placed in our client by its partners), and an innovative approach to technical and business matters. You will be expected to work in a professional, efficient, and organised manner, both alone and as part of a team, communicating clearly internally and externally.MAIN DUTIES: To carry out tasks as required by our client, within the scope of the role, including:• research and development of commercially valuable technologies.• identifying markets and companies with whom our client can create and develop ideas or products,• building and maintaining relations with individuals and or companies who may value our client’s services,• managing projects and budgets,• preparing proposals, reports, presentations etc., for potential and actual clients,• travel to client’s premises or other meeting venues either within the UK or abroad. • be able to maximise opportunity to continue client relationships and develop new business, both through existing and new clients. To comply with formal requirements such as:• adhering to Health and Safety requirements and other relevant rules and regulations,• being familiar with and following the Company Handbook, • completing forms and timesheets,• so far as possible, following standard company operating procedures, • being answerable to one’s Line Manager and the Managing Director. COMPETENCIES: Essential: • An outstanding understanding of applied physics and engineering principles.• Creativity and problem solving skills.• Good mathematical/analytical skills.• Self motivation and an ability to operate with minimal supervision Desirable: • Expertise in analogue and digital electronics.• Knowledge of design for manufacture and manufacturing processes.• Power electronics design• Commercial experience, especially in a consultancy or engineering context.• Proven experience of selling technical consultancy.• Practical laboratory or workshop experience.RELEVANT QUALIFICATIONS • A good first degree (2.1 or above) in physics, engineering or a related subject from a top University.• A higher degree (PhD) is advantageous, but not essential. http://www.polytec.co.uk/jobs/technology_developer_-_electronic_engineering_22812.html Tue, 04 May 2010 17:01:06 GMT The company are looking to build their team of IC designers to develop their High Accuracy Tracking technology. A chance to join a small but experienced team developing novel systems and circuits allowing this exciting technology to be realized in a cost effective manner for use in the clients infrastructure products.Degree qualified (or equivalent), the successful candidate will have knowledge and experience in High speed analogue and Mixed Signal IC design using Cadence tools. Experience in high performance Operational Amplifier design is essential and Switched Mode techniques and Linear power supply regulation will be an advantage.Experience of taking specifications and turning them into transistor designs at a sub cells level and building the design through to top level schematics is necessary. Understanding of processes for power management is required to allow robust design. The candidate will have hands on experience of IC layout as well as working with dedicated IC layout engineers. The candidate must be able to work on their own initiative, but also communicate well with the other members of the team and contribute where necessary to ensure project completion on time.Experience Required: Designed high performance analogue / mixed signal ICs in CMOS technologies.Ultra High speed amplifier/line driver design (>100MHz.Voltages in the range 5-10V.Knowledge of topologies and design structures for driving reactive loads.Good working knowledge of leading edge processes.Used to working with Foundry Design Kits and working round their limitations.Seen more than 2 design through to commercialisation.Design for process spread and corner cases.Design for test and creating a test specification for the devices.Power Management.Switched Mode power supply design experience (optional, but desirable).Linear power regulation design experience (optional, but desirable).Good knowledge of ESD and Latch-up prevention techniques.Experience with Cadence tool chain is essential http://www.polytec.co.uk/jobs/analogue_ic_design_engineers_22790.html Tue, 29 Jun 2010 16:01:15 GMT Our client is looking to build its team of IC designers to develop their High Accuracy Tracking technology. A chance to join a small but experienced team developing novel systems and circuits allowing this exciting technology to be realized in a cost effective manner for use in the company’s infrastructure products.Degree qualified (or equivalent), the successful candidate will have knowledge and experience in High speed analogue and Mixed Signal IC design using Cadence tools. Experience in high performance Operational Amplifier design is essential and Switched Mode techniques and Linear power supply regulation will be an advantage.Experience of taking specifications and turning them into transistor designs at a sub cells level and building the design through to top level schematics is necessary. Understanding of processes for power management is required to allow robust design. The candidate will have hands on experience of IC layout as well as working with dedicated IC layout engineers.The candidate must be able to work on their own initiative, but also communicate well with the other members of the team and contribute where necessary to ensure project completion on time.Experience Required:  - Designed high performance analogue / mixed signal ICs in CMOS technologies- Ultra High speed amplifier/line driver design (>100MHz)- Voltages in the range 5-10V - Knowledge of topologies and design structures for driving reactive loads- Good working knowledge of leading edge processes  - Used to working with Foundry Design Kits and working round their limitations- Seen more than 2 design through to commercialisation- Design for process spread and corner cases- Design for test  and creating a test specification for the devices- Power Management- Switched Mode power supply design experience (optional, but desirable)- Linear power regulation design experience (optional, but desirable)- Good knowledge of ESD and Latch-up prevention techniques- Experience with Cadence tool chain is essential http://www.polytec.co.uk/jobs/senior_analogue_ic_designer_22787.html Tue, 15 Jun 2010 11:01:11 GMT Applicants must have a strong track record in the development of PCB level high speed/high power analogue circuits, possibly in the design of audio amplifiers, video amplifiers or RF amplifiers. They should be able to “Design an amplifier to have a maximum bandwidth and keep stable” with open loop bandwidths in the order of 100MHz.Key Responsibilities:- Design analogue electronic circuits- Providing guidance on PCB layout related to their designs- Verification and validation of their designs (a hands on role)- Advise on manufacturing test relating to their designs- Ongoing support and maintenance of their designsThe candidate is likely to have the following skills and experience:- Experience in designing amplifiers up to 100Mhz b/w- Extensive experience with designing high performance amplifiers using discrete components- Experience in Class D amplifier design- Experience in modelling/simulating the design with the view of “proving” the design ahead of prototyping- Understand stability and compensation techniques- Thorough understanding of BJT and MOSFET device characteristics and circuit topologies- Understanding of device speed limitations, failure modes and breakdown mechanisms- Practical implementation knowledge regarding PCB layout to minimise parasitic effects (the devices we use have the potential to oscillate at microwave frequencies- Experience of using test equipment like spectrum and network analysers- Good hands on bench skills (e.g soldering)- Practical knowledge of measurement techniques e.g. how to make accurate measurements of amplifier open loop response- Good appreciation of potential manufacturing assembly/test problems http://www.polytec.co.uk/jobs/analogue_designer_22785.html Tue, 15 Jun 2010 11:01:11 GMT Our client is a world leading network independent supplier of radio systems and they have a vacancy for Head of System Quality and Test. Reporting to the Development Director, this important new role will bring together, enhance, and extend existing quality control functions and to continuously improve product quality by broadening, intensifying and deepening the degree of automation. A major focus will be to drive root-cause-analysis efforts and employ rigorous analysis of existing development, manufacturing and repair data to identify and drive cost-effective improvements. Description of Job: The role is tasked with the creation and line-management of the System Quality and Test function as a centre-of-excellence within their Development organisation. The main responsibilities and tasks are:• Re-organisation and effective management of existing multi-disciplinary test teams • Systematising collection and analysis of quality control data across Development • Scaling-up automated software, mechanical and audio testing in Development• Structuring and coordinating our client’s trials of new products and customer field trials to ensure timely feedback into product Development• Creation of new quality controls: • Fit-for-purpose testing — based on end-user use-cases • Accelerated life and stress testing• Driving root-cause analyses of defects found during Development, Manufacturing, supply-chain and Customer testingTechnical skills and experience:Essential — Candidates for this role should have experience and proven knowledge of some or all of the following:• Automation of manual software testing – tools, system and scripting methodologies • Configuration management of hardware and software designs • Electrical and mechanical certification regimes • Conformance testing in wireless telecommunications (PMR, GSM, GPRS, 3G, LTE etc.)• Automated mechanical testing• Test database integration and management• Developing and managing systems and processes to implement the aboveDesirable -The following skills, knowledge or experience would be beneficial for this role:Firm understanding of electronic, RF, mechanical, digital and software testing and quality controls1. EMC2. Vibration and shock3. IP ratings and testing • Audio testing – manual and automated • Formal qualifications in quality assurance and quality control • Understanding and appreciation of development processes • Knowledge of intrinsically-safe requirements and conformance • Ability to think at a system level – to understand products and features as a part of a larger whole • Knowledge of the RandTTE Directive and general legal requirements for CE markingPersonal attributes:Essential — • Proven leadership, team coordination and reporting skills• Good analysis, numerical, written and verbal communications skills• Line management experience of teams of >20-30• Data-driven decision maker with experience of implementing strategic change• Able to act as a overall quality gatekeeper whilst remaining pragmatic to business needs• Ability to consider issues from customer and product user perspectives• Tenacity and an ability to probe issues and understand their root causes• Ability to work to a high level of quality and detail, having understood the “big picture”• Ability to drive the technical issues on a project forward in a time-efficient mannerDesirable – • Passionate about test and uncovering defects as early in the development process as possible• Ability to deal with external test houses, certification bodies and security regimes• Flexible approach to working in a transient, project-based environment• Can do attitude, robust and able to cope with broad based and demanding brief• Organised and structured way of working http://www.polytec.co.uk/jobs/head_of_system_quality_and_test_22770.html Thu, 10 Jun 2010 21:01:10 GMT Our clients are looking for an engineer at a relatively low level to perform testing of mobile phones from a predefined test plan. The type of testing is from an end users perspective but will also involve the ability of taking test logs from the device under test when failures occur. Ideally the person will have a telecoms background in the mobile sector and the position will involve travel within Europe probably twice a month for a week at a time. http://www.polytec.co.uk/jobs/test_technician_engineer_22742.html Thu, 29 Jul 2010 12:01:16 GMT Main purpose of the jobTo work within multi-disciplinary teams, designing high-quality, reliable analogue electronics design for major product developments and innovative, ‘proof-of-concept’ technology demonstrators. You will contribute technically, and apply your existing theoretical and practical expertise to develop innovative products and technologies for our clients.Type of work undertaken by the division/groupWe form powerful design and development teams by combining a highly creative, lateral thinking approach with our excellent technical skills and a broad base of industrial experience. Our work includes both the undertaking of complete product developments from concept to market; and also consulting with our clients on their technology, strategy or development processes.The Industrial and Scientific Products group specialises in the design and development of complex products, serving a range of industry sectors including: CleantechScientific instruments and sensors MechatronicsDefence and SecurityIndustrial systemsConsumer productsThe main areas of expertise within this multidisciplinary group are: Electromechanical systems design Numerical analysis and mechanical engineering Analogue and digital electronicsElectric motor and drive technologies Management of new product developmentsSpecific responsibilities This is an excellent opportunity for an engineer with the ambition and ability to achieve excellent results in a highly demanding industry, and to find novel and radical solutions to new and existing problems under tough commercial and time restraints.You will be using your strong technical skills to make a significant contribution to development projects, from initial concepts through to final delivery. This will include:Concept generationAnalysis and development of system architecturesDetailed design of analogue and digital electronicsWorking closely with our clients, other engineers and technicians to implement detailed design solutionsSpecifying, designing and executing experimental programmes with teams of engineers, scientists and techniciansDeveloping and building proof-of-concept prototypesWriting technical reports and producing high quality design documentationMinimum requirements To meet the demanding requirements of this role you must have:An excellent first degree in electronic engineering or a related disciplineStrong technical skills, with key strengths in analogue electronicsA genuine passion for electronics, and engineering in generalA creative approach to problem solving and concept generationAn appreciation of the use of engineering analysis in product developmentRelevant, post graduate industrial experienceIn addition, qualifications and experience in the following areas would be beneficial:Signals and sensor engineeringAudio engineeringAn ability to apply Matlab / Simulink as a design and simulation toolDigital electronics designMicrocontroller and embedded control systems designEmbedded software design and implementationA post-graduate qualification, preferably with a high level of practical or industrial experienceAn understanding of design for manufacture (DfM) and design for test (DfT)Experience in managing new product introductions, either in-house, or using electronics manufacturing service providers (contract manufacturing partners) http://www.polytec.co.uk/jobs/senior_electronics_engineer_-_analogue_electronics_22734.html Thu, 08 Apr 2010 16:01:10 GMT Main purpose of the jobTo work within multi-disciplinary teams, designing high-quality, reliable power and control electronics for major product and system developments and innovative, ‘proof-of-concept’ technology demonstrators. You will contribute technically, and apply your existing theoretical and practical expertise to develop innovative products and technologies for our clients.Type of work undertaken by the groupWe form powerful design and development teams by combining a highly creative, lateral thinking approach with our excellent technical skills and a broad base of industrial experience. Our work includes both the undertaking of complete product developments from concept to market; and also consulting with our clients on their technology, strategy or development processes.The Industrial and Scientific Products group specialises in the design and development of complex products and systems, serving a range of industry sectors including: CleantechScientific instruments and sensors MechatronicsDefence and SecurityIndustrial systemsConsumer productsThe main areas of expertise within this multidisciplinary group are: Electromechanical systems design Numerical analysis and mechanical engineering Analogue and digital electronicsElectric motor and drive technologies Management of new product developmentsSpecific responsibilities This is an excellent opportunity for an engineer with the ambition and ability to achieve excellent results in a highly demanding industry, and to find novel and radical solutions to new and existing problems under tough commercial and time restraints.You will be using your strong technical skills to make a significant contribution to development projects, from initial concepts through to final delivery. This will include:Concept generationAnalysis and development of system architecturesDetailed design of analogue, digital and power electronicsWorking closely with our clients, other engineers and technicians to implement detailed design solutionsSpecifying, designing and executing experimental programmes with teams of engineers, scientists and technicians Developing and building proof-of-concept prototypesWriting technical reports and producing high quality design documentationMinimum requirements To meet the demanding requirements of this role you must have:An excellent first degree in electronic engineering or a related disciplineStrong technical skills, with key strengths in power electronics Microcontroller and embedded control systems designA genuine passion for electronics, and engineering in generalA creative approach to problem solving and concept generationAn appreciation of the use of engineering analysis in product developmentRelevant, post graduate industrial experienceIn addition, qualifications and experience in the following areas would be beneficial:Digital electronics designAn ability to apply Matlab / Simulink as a design and simulation toolEmbedded software design and implementationThermal management control and designUse of analytical CAE toolsA post-graduate qualification, preferably with a high level of practical or industrial experienceAn understanding of design for manufacture (DfM) and design for test (DfT)Experience in managing new product introductions, either in-house, or using electronics manufacturing service providers (contract manufacturing partners) http://www.polytec.co.uk/jobs/senior_electronics_engineer_-_power_and_control_22733.html Thu, 08 Apr 2010 16:01:10 GMT Main purpose of the jobTo contribute to the development the client’s business in the field of professional wireless design and development services.  The role offers a high level of diversity through the application of the latest wireless technology in a wide range of market sectors.  The business development activity involves the creation of value propositions, based on our design skills and intellectual property in wireless technology and communicating these propositions to the market through focussed sales and marketing activities. Type of work undertaken by the groupOur client is a world leader in wireless communication technologies, with one of the largest independent wireless development teams in the world.  The division works across the entire wireless landscape - from high volume consumer applications, such as portable internet-based devices, through to professional high-performance systems, including the air traffic control radios used to govern the US airspace.  The breadth of our activities in wireless system and technology design provides tremendous variety to our team members and invaluable insight for business development professionals.  The markets that we address include cellular and telecommunications, healthcare, industrial, satellite, consumer and automotive.  Examples of our wireless design experience includes the first digital patient monitor in the medical WMTS band, the WiMAX PHY reference design adopted as the gold standard for type approval testing, a professional intercom used at the Olympic Games and within professional broadcasting studios, satellite handsets, as well as key technologies fuelling the rollout of 4th generation cellular systems. Specific responsibilities * To create and support focussed business development / sales campaigns based on our investment in technology and skills within the wireless division* To identify target companies and devise appropriate technical / professional services offerings* To initiate contact, make pre-sales visits and identify prospective business opportunities* To build specific sales propositions and develop them into commercial relationships with clients* To lead the bid teams – working alongside a project manager and technical authority* To close sales – negotiating terms and conditions* To be part of the project delivery team,  remaining ultimately responsible for the client relationship and commercial success of the programmeMinimum requirements* A degree in an appropriate technical subject* Substantial experience and a track-record of wireless design and development* Experience of complex, high-value, technical sales / business development* Market knowledge of existing technology (Broadband and Cellular, Bluetooth, WiMAX, WiFi, NFC, DECT, ZigBee, Satellite, UWB as well as custom radio solutions)* Experience of taking wireless products through the full development cycle is highly desirable* Excellent interpersonal, communication and presentation skills* Supplementary commercial qualifications are highly desirable http://www.polytec.co.uk/jobs/telecoms_business_development_22732.html Thu, 08 Apr 2010 16:01:11 GMT As part of a project team, you will be responsible for the design, development, and test of current and future products. This is a hands-on position that will involve you in all aspects of design, assembly and testing. Your job will be to conceptualise, design, implement and validate subsystems and systems solutions to enable the company to produce and deliver quality products to the digital colour printing market.Experience - Experience planning, designing, prototyping, creating and performing test plans, analysing results, and implementing solutions for cutting edge products - Experience in producing robust designs for static and dynamic systems- Experience designing and implementing cost-effective equipment modifications to help improve safety, reliability and performance- Experience in analysing customer requirements and other data to evaluate the feasibility, cost, and effort needed to deliver a high quality product designs or applications embodying these requirements- Experience working with other engineers and other personnel to implement operating procedures, resolve system malfunctions, and provide required technical information to manufacture, operate and support the systems- Write performance requirements for product development or engineering projects- Able to identify, quantify and resolve subsystem and system issues working as a member of a team- Demonstrated ability to verify subsystem or system performance through empirical testing as well analytical modelsQualifications and skills requirements- Indepth experience working as a development engineer within a New Product Development and Introduction team- Candidates must have a 1st or 2.1 minimum, degree in Mechanical, Production, Electronic, Materials or equivalent engineering discipline- Expert knowledge in CAD tool, preferably with Solids Works- Preferred candidates will have strong knowledge and experience in ink jet ink system and printhead integration development- Motivated by working in new cutting edge technology- Candidates should display good problem solving / troubleshooting skills and experience- Strong skills as a team player and as a results oriented, constructive team member- Able to develop strong cross-functional working relationships- Able to work in a results oriented, fast pace environment- Strong written and verbal communications skills- Organised, self-motivated, and enjoy multi-tasking http://www.polytec.co.uk/jobs/development_system_engineer_22714.html Wed, 31 Mar 2010 16:01:11 GMT JOB PURPOSETo improve the lifetime of the client’s fluorescent and phosphorescent devices by understanding which materials promote long lifetime, and by correlating materials properties and process parameters to device performances. Using the improved understanding in this area, to aid development of new materials, deposition methods and device structures with better performance. KNOWLEDGE/EXPERIENCE/SKILLS REQUIREDPhD or equivalent research experience in Physics or Material Science,together with working knowledge of device analysis and statistical methods.Knowledge of polymer systems as well as some programming experience -(visual basic and Labview) would be an advantage.Good team player with excellent communication skills: able to communicate clearly with people from a variety of technical and non technical backgrounds at different levels of the organisation.Proactive and self motivated can identify, promote and implement relevant research activities, can manage his/her own timeKEY RESULT AREASDesign and execute experiments to evaluate the performances and the potential of new materials either fluorescent or phosphorescent emitters or charge transporting systems.Design and execute experiments to correlate material and process parameters to device performancesWith the help of modern statistical tools support the identification of correlations between materials properties, processing parameters and device performances.Communicate effectively with the other Research team members as well as with relevant staff to promote internal discussion and strive towards consensus on current best practice.Generate IPMAIN ACTIVITIESDesign and propose experiments, write batch travellers and analyse device data to identify potentially interesting materials and to optimise their performances.Proactively collect relevant data and analyse them to extract statistically significant correlations between device properties and material and process parameters.Clearly report finding and formulate recommendations either within or outside the organisationSupport device fabrication and testing when required (especially in evaluating new methodology)When required supervise junior members of staff. Clearly communicate any best practice across the organisation.KEY WORKING RELATIONSHIPSLiase with line manager and the group leader for research direction and provide feedback to the group.Seek advice from experienced researchers within the company on device fabrication, materials characteristics and experimental techniques.Provide advice on suitable experimental techniques, result interpretation and experimental set-ups. Collaborate and communicate with staff from research institutions and customers. http://www.polytec.co.uk/jobs/scientist_-_device_physics_22672.html Tue, 13 Jul 2010 17:01:18 GMT To support product development by providing technical leadership in design, implementation and delivery of automated test systems for development and manufacturing test of products. The role is key to the design and development of production test systems for manufacturing and their support/improvement for production.In addition to detailed design activities associated with product test, the role also provides internal development of test result analysis tools.This role will require occasional travel to the factories, typically up to five weeks per year.The candidate is likely to have the following skills:- Experience of operating in both a development and production (transfer and set-up) environment- Understands, in detail, manufacturing requirements for documentation and clarity of instruction- Displays a determination to succeed and to drive projects to completion- Has a very good understanding of both lab and production test equipment and processes- Is able to work individually and as part of a team- Good communicator – both written and spoken. Must be able to document and explain technical problems to others- Ability to lead a technical investigation and resolve problems across multiple disciplines- Is familiar with manufacturing processes and have firsthand experience of volume manufacturing.Key Responsibilities:- Design and development of new automated development and production tests from concept through to and including volume production- Line maintenance and improvement of existing production test systems suitable for supporting the development of modulators through prototype manufacture into volume manufacture- To ensure that appropriate design and specification processes are in place and followed to aid accurate and timely delivery of required test systems- To ensure that appropriate processes are in place and followed to ensure that all test deliverables are appropriately reviewed, tested and released for both internal and external customers- To provide technical expertise to support Project Managers in the task identification, specification and planning of projects, provision of regular status updates, identification of risks and possible mitigations - Provide expert advice in assessing (internal and external) customer requirements and identification of the internal need for tools and equipment- Transfer of production test systems into manufacturing sites and support of these in production- Writing test method and supporting tools documentationRequired Skills and Experience:- Will be able to demonstrate examples of technical leadership in design, implementation and delivery of automated test systems for development and manufacturing test- Will have experience of the implementation and validation of production fixtures and testers, including mechanical, electronic PCB’s and software design- Candidate is likely to have been an experienced electronics design engineer who has moved into test development- The candidate will be comfortable with generating test specifications and specifying test solutions from product schematics and initial product specification- Ability to read product schematics (mixed signal) and define test methods and test equipment with minimal support from development engineers- Will have a knowledge of the statistical analysis of test results- Has experience of product development from concept to production and both understands and is practiced in product development processes and the phased approach to projects- Is capable of documenting design requirements to a sufficient standard that others can easily follow these to achieve the required implementation with minimal support- Will be quality orientated with attention to detailPreferred Skills- Knowledge of product approvals and statutory regulations- LabView 8 Programming- Matlab Programming http://www.polytec.co.uk/jobs/principal_test_engineer_22653.html Tue, 15 Jun 2010 11:01:13 GMT Main purpose of the jobTo take a lead role in the development of state-of-the-art wireless systems.The role involves leading a team in the specification, design and implementation of advanced wireless products, providing direction and guidance that results in successful and market-leading solutions for our clients.Specific responsibilities- To take a lead role in the Radio Systems Group. - Prepare specifications for wireless systems, the design of wireless systems and be capable of converting application requirements into real solutions- Lead multi-faceted engineering teams, focusing the team to deliver a solution- Participate in sales meetings with clients and, in conjunction with the business developer’s, help interpret client requirements and demonstrate the company’s capability- Prepare and generate the technical response to bids and tenders for both existing and future clients- Define the most suitable analogue system design or architecture to meet a specification- Create novel design solutions that will be of particular interest to our clients and contribute to the IP portfolio- Act as a design mentor to other members of staff and to contribute to the development of the technical discipline of the group- Where appropriate, contribute to the maintenance and development of our CAD systems to enhance our development capabilityMinimum requirementsTo meet the demanding requirements of the role you will have a good degree in an engineering or related subject. With previous relevant experience working as a radio designer, possibly within a lead role for a telecommunications company or other relevant area, you will also have:- A strong technical background in radio design - Extensive experience of overall system design across multiple disciplines- A proven ability to lead engineering teams- Good knowledge of the product development process- A proven record of getting designs right first time- Good oral and written communication skills- The ability to interact effectively at all levels in a client organization- An understanding of wireless DSP will be considered an advantage (where appropriate, training will be provided) http://www.polytec.co.uk/jobs/radio_systems_lead_22602.html Fri, 19 Feb 2010 16:01:09 GMT Our client is seeking a Development Engineer to specialise in Windows Desktop Application Software.Main Duties Include:Continuing development of our client’s existing C# and C++ applications Designing and developing software to manage and display large amounts of real time data.Qualifications and Skills:Engineering Degree or equivalent experience Development and design experience working with multi threaded real time applications on Windows Platforms and graphical user-interface design .NET/CLI APIs and Win32 programming experience.Extensive knowledge in at least one object-oriented development platform (C#, C++ or comparable) is required. The ideal Candidate will have the following attributes:Possess excellent communication and organisational skills.Be able to work on own initiative and also work well within a team environment.Will have a technical background (electronics, physics, maths, signal processing or an automotive background would be an advantage) Whilst this role is predominantly developing Windows based applications some Linux experience would also be an advantage. http://www.polytec.co.uk/jobs/development_engineer_-_windows_desktop_engineer_22555.html Tue, 09 Feb 2010 17:01:08 GMT Working alongside the Production Engineering team, a Production Engineer is required to concentrate on the improvement of the manufacturing process, overseeing the productivities of the machine, control capital procurement projects and deal with daily issues as they arise. Main responsibilities of the role:1. Provide in-depth technical support, including extensive program investigations and modifications. This will require extensive experience in programming intelligent drives (Control techniques:Sypt Pro), PLC’s (the company use Siemens S7, and Allen Bradley (rs Logix))and PC’s.2. Manage capital investment projects on time and in budget.3. Be proactive in identifying and communication opportunities to continually improve and implement sustainable solutions to technical problems.4. Clearly communicate process and plant status to other team members and shifts.5. Support and process engineering changes for plant capability, maintenance and improvement where required.6. Develop and undertake Production Engineering (SMED, 5s and similar) for all equipment and machines. 7. Maintain and update all relevant engineering drawings.8. Single Minute Exchange of Dyes – optimising change over process.9. Continue development of 5s within department.10. Other duties as may reasonably be required.Problem solvingThe post holder is required to be able to resolve both simple and complex failures and issues.Decision makingIt is necessary to work within tight deadlines and to be both precise and accurate.CommunicationThe ability to gain rapport and credibility quickly as well as communicate at all levels is vital. Be comfortable with phone or face to face negotiation. Both written and oral communication skills are required to be of a high standard.Time ManagementThe position involves ensuring that all work is organised to meet relevant deadlines. The ability to prioritise tasks and manage time to achieve tasks is required.RepresentationSince the post holder will liaise with many external customers/visitors it is necessary for the person to represent the Company in a professional and business-like manner.TravelTravel, both in the UK and abroad, is a feature of this position. This will be in support of both capital investment projects, and high level technical support.Knowledge and Skills requiredYou must possess a working knowledge of Microsoft Office including Word, and Excel, AutoCad and a visual programming language. Good communication and organisational skills are essential and the person must have the confidence and maturity to work on their own initiative and remain calm under pressure. Knowledge of rotating machinery would be advantageous whilst extensive experience in programming intelligent drives, PLC’s and PC’s is essential.QualificationsApplicants should possess a good general standard of education in addition to a Degree, HND or HNC Electronic qualification, though demonstrable ability is the actual requirement.Desirable Attributes* Proven experience in fault finding on modern software driven systems.* Experience in a purchasing / expediting function.* Experience in a logistics function. http://www.polytec.co.uk/jobs/production_engineer_with_plc_programming_experience_22537.html Tue, 08 Jun 2010 17:01:17 GMT Our client is seeking a bright, enthusiastic, hands-on physicist and electronics specialist with both an aptitude and interest in commercial development. The successful candidates will have strong academic credentials, an intuitive grasp of fundamental scientific principles, and demonstrable drive and commitment.The Role- Development of optimised electronics solutions for novel sensor, actuator and display technologies- Applying skills to create innovative and effective solutions to real-world problems, working on and leading demanding technology and product development projects- Participate in the client interface, communication and management- Take responsibility for best in class project delivery.The Qualifications- A 1st or 2.1 degree in physics or electronic engineering with a PhD from a leading university- Electronics experience including practical analogue and digital hardware design, development and analysis skills- Very good oral and written communication, presentation, and team skills- Project management and commercial experience an advantage http://www.polytec.co.uk/jobs/physicist_electronics_22531.html Thu, 04 Feb 2010 11:01:07 GMT Our client is seeking a bright, enthusiastic, hands-on physicist specialising in electromagnetic design with both an aptitude and interest in commercial development. The successful candidate will have excellent academic credentials, an intuitive grasp of fundamental scientific principles, and demonstrable drive and commitment.The Role- Conception, design and practical implementation of electromagnetic solutions for industrial, healthcare and consumer applications- Applying skills to create innovative and effective solutions to real-world problems, working on and leading demanding technology and product development projects- Participate in the client interface, communication and management.- Take responsibility for best in class project delivery.The Qualifications- A 1st or 2.1 degree in physics or engineering with a PhD from leading institute- Experience in electromagnetic actuator, sensor, and control development, magnetic materials, and wireless power and data transmission- Strong analytical capabilities and numerical simulation experience- Very good oral and written communication, presentation, and team skills- Project management and commercial experience an advantage- Familiarity with product development processes and design for EMC compliance http://www.polytec.co.uk/jobs/physicist_electromagnetics_22530.html Thu, 04 Feb 2010 11:01:07 GMT Graduates with industrial experience or recent graduates with relevant academic course or research experience are welcome to apply. The client will NOT consider graduates who are looking for a summer 2010 start.Main purpose of the job: To work on client assignments developing digital signal processing software for a wide range of wireless systems and products.Type of work undertaken by the division/group:The company is a world leader in wireless communications, with one of the largest independent wireless development teams in the world. Their work ranges from high volume consumer applications such as portable internet-based devices, through to professional high-performance systems including the air traffic control radios used to govern the US airspace. This breadth of wireless activity provides tremendous variety to the team members. The markets that they address include telecommunications, healthcare, industrial, satellite, consumer and automotive. Examples of their wireless design includes the first digital patient monitor in the medical WMTS band, the WiMAX PHY reference design adopted as the gold standard for European type approval testing, a professional intercom used at the Olympic Games and within professional broadcasting studios, satellite handsets, as well as key technologies fuelling the rollout of 4th generation cellular systems. The DSP Group in the Wireless Division works closely with other disciplines to develop cutting-edge software-defined radio products for standards like LTE, 3G and WiMAX, and for bespoke systems, and related technologies like audio and video compression. They use first principles thinking to create class-leading designs based on digital signal processors ranging from our own in-house ASICs cores through to the highest-performance multi-core devices.Specific responsibilities: Technical staff work on client assignments in multi-disciplinary project teams, sometimes on more than one project concurrently and in different team roles. A strong desire to learn to develop and implement solutions based on different technologies and for different target markets is essential. Their customer base is diverse and ranges from blue chips to start-ups. High quality work is essential from every team member. You will work on the design, implementation and testing of signal processing software on high-performance and unusual hardware platforms.As a project team member you would be responsible for carrying out your specific project tasks within the time-scales and budgets agreed with your project managers. There are many aspects to the work in addition to design. As your experience develops, you might wish to take on further responsibilities.Minimum requirements to meet the requirements of this role you will have:An excellent first degree or PhD in engineering, computer science, mathematics or related discipline. Proven strong mathematical skills and interest in applying mathematics to solve problems.Imaginative and inquisitive mind, eager to learn new skills and to develop solutions for interesting and complex problems.Strong C programming and software engineering skills.Good communication skills, both written and verbal.In addition, any experience of the following will also be beneficial:Experience of Linux programming, scripting and administration.Experience of programming in Assembly Language and MATLAB.Experience in DSP algorithm development. Experience working with embedded hardware and tool chains.Understanding of communications theory. http://www.polytec.co.uk/jobs/engineer_or_computer_scientist_wireless_div_22491.html Fri, 22 Jan 2010 11:01:07 GMT Our client is seeking bright, ambitious electronics / software engineers to create, analyse and develop new medical technologies. The successful candidates will be expected to make a solid contribution to a group with core business in drug delivery devices, manufacturing systems and surgical technology.You will be expected to: * Immediately engage in a technically and commercially stretching environment* Contribute to and lead technically demanding medical technology projects* Effectively integrate with a talented multi-disciplinary team of like-minded peopleYou will have: * A 1st or 2.1 class degree in electronics or computer science * Intrinsically high levels of motivation * Excellent communication and presentation skills * A good mixture of analytical, experimental and creative capabilities* Strong interest / track record in medical device development http://www.polytec.co.uk/jobs/electronics_software_engineer_22461.html Wed, 17 Feb 2010 10:01:15 GMT Main purpose of the jobTo manage and deliver large, complex, multidisciplinary drug delivery device development projects. The position will require you to apply your programme management abilities and technical skills to the development of world-leading medical products for our clients around the globe.Specific responsibilities- Management of projects from the proposal stage through to the delivery stage of the project- Liaising directly with clients to understand their programme needs for drug delivery device development programmes- Estimating timeline, resource, budget and key technical risks for proposal preparation- Building and managing the project team with the appropriate level of expertise for the proposed work- Reporting technical and financial progress both to the client and internally- Leading meetings with clients, give presentations and communicate ideas and concepts to all disciplines- Take the lead in ensuring that projects are run to relevant quality standards including the EU and FDA standards for medical devices- Take the lead in ensuring that projects meet appropriate safety standards- You will also support the drug delivery business development function, exhibiting and presenting at key conferences and representing the Drug Delivery Products Group at sales meetings.- You will use your strong technical expertise and knowledge to develop relationships with current and future clients.Minimum requirements- To meet the demanding requirements of this role you will have an excellent degree within an engineering or scientific discipline- A proven track record in the delivery of large and complex development projects to time and budget within a regulated environment- Experience of managing risk and timeline on development projects with considerable novel content- Experience of managing multidisciplinary teams, often across different client sites and worldwide- You should have excellent oral and written communication skills- You should be a self-motivated team player who is highly enthusiastic about the drug delivery product development area- An excellent understanding of medical device development processes compliant with ISO 13485, QSR or experience of a similar quality system such as ISO9001In addition, experience of the following will also be beneficial:- Experience in drug delivery or pharmaceuticals either within a product company or consultancy with direct experience of device development- Experience in taking a medical or other product from concept through to launch including scale up and transfer to manufacture http://www.polytec.co.uk/jobs/programme_manager_22445.html Fri, 08 Jan 2010 10:01:05 GMT Main purpose of the jobTo take a leading role in the analysis, design and delivery of multi-disciplinary projects in the field of drug delivery products and devices. The position will require you to apply your numerical and analytical skills to the development of world-leading medical products for clients around the globe.Specific responsibilitiesThis position involves taking lead roles within development projects with exposure to all aspects of development from concept creation to final product delivery. You will be involved in organising and progressing the analytical engineering effort to meet the requirements of the project as well as providing creative solutions to fluid and thermodynamic problems. Significant project management tasks may also be a key part of the role.You will use your strong technical expertise to develop relationships with current and future clients by understanding their needs, writing proposals to define the work programmes, holding technical workshops and presenting data. You will provide a technical point of contact within the company for clients. You will manage tasks within projects requiring delivery within tight timescales and budgets, managing both internal and external resources. You will also be required to oversee and advise on implementation by less experienced engineers.Your specific responsibilities will include:- Definition of technical solutions for product or system developments- Leading engineers to realise your technical solutions- Undertake or lead numerical / CFD analyses of concepts and solutions- Develop new and novel solutions to complex fluid and thermodynamic problems- Writing technical reports and producing high quality design documentationMinimum requirements- To meet the requirements of this role, you will have an excellent first degree in a numerical or engineering related subject and should have a proven high level of practical experience and technical skills. - Exposure to the healthcare industry such as a Pharmaceutical or Medical Device company would be a strong advantage. - A PhD in a numerical subject would also be desirable- An excellent knowledge of analytical techniques for solving fluid and thermodynamic problems is essential. - A good theoretical understanding and practical experience of CFD codes and techniques is desirable, preferably commercial codes such as Fluent, CFX or STAR. - Experience in 3D CAD, preferably Pro Engineer and Solid Works would be beneficial although not essential. http://www.polytec.co.uk/jobs/analytical_engineer_22425.html Thu, 24 Dec 2009 11:01:05 GMT Project Manager – WirelessMain purpose of the jobManaging challenging and often complex wireless product developments for clients in a wide range of market sectors, covering the full Product Development Lifecycle from concept to manufacture. The role offers a high level of diversity and interest and includes interworking with other seniors within the Wireless Division to develop relationships with prospective clients and to identify new business opportunities. Type of work undertaken by the division/group The company is a world leader in wireless communications, with one of the largest independent wireless development teams in the world.  The group works across the entire wireless landscape - from high volume consumer applications such as portable internet-based devices, through to professional high-performance systems including the air traffic control radios used to govern the US airspace.  This breadth of wireless activity provides tremendous variety to their team members.  The markets that they address include telecommunications, healthcare, industrial, satellite, consumer and automotive.  Examples of their wireless design includes the first digital patient monitor in the medical WMTS band, the WiMAX PHY reference design adopted as the gold standard for European type approval testing, a professional intercom used at the Olympic Games and within professional broadcasting studios, satellite handsets, as well as key technologies fuelling the rollout of 4th generation cellular systems.Specific responsibilities Managing wireless development projects, typically consisting of multidisciplinary teams (including hardware, software, digital signal processing, mechanics and production engineering).You will manage projects through the complete development lifecycle, from requirements definition through to final delivery.  You will be involved in proposal preparation, selection of the team, negotiating with 3rd parties, managing concept generation, analysis of system architecture, liaison across engineering disciplines and the specification, implementation and testing of the design.You will manage projects typically in the region £10,000 to £3,000,000 that require delivery within tight timescales and budgets, managing both internal and external resources.  You will report project progress directly to clients.Minimum requirements A good degree in engineering. Substantial industrial experience managing wireless product design and development covering the full product development lifecycle. Other requirements include;* Understanding of the wireless product development process* Experience in managing products into manufacture* Experienced in managing multi-disciplinary projects (RF, analogue, digital, software, mechanics)* Excellent interpersonal, communication and presentation skills* Working knowledge and experience of the wireless regulatory and type approval environment is desirable http://www.polytec.co.uk/jobs/project_manager_-_wireless_22422.html Tue, 22 Dec 2009 17:01:08 GMT Main purpose of the jobTo take a leading role in the analysis, design and delivery of multi-disciplinary projects. The position will require you to apply your numerical and analytical skills to the development of world-leading products for our clients around the globe.Specific responsibilities- Definition of technical solutions for product or system developments- Leading engineers to realise your technical solutions- Undertake or lead numerical / CFD analyses of concepts and solutions- Develop new and novel solutions to complex fluid and thermodynamic problems- writing technical reports and producing high quality design documentation- Significant project management tasks may also be a key part of the role.- You will use your strong technical expertise to develop relationships with current and future clients by understanding their needs, writing proposals to define the work programmes, taking a leading role in technical workshops and presenting data.- You will provide a technical point of contact within the company for clients. - You will manage tasks within projects requiring delivery within tight timescales and budgets, managing both internal and external resources. - You will also be required to oversee and advise on implementation by junior engineers.Minimum requirements- To meet the requirements of this role, you will have an excellent first degree in a numerical or engineering related subject and should have a proven high level of practical experience and technical skills. - A PhD in a numerical subject would also be desirable.- An excellent knowledge of analytical techniques for solving fluid and thermodynamic problems is essential. - A good theoretical understanding and practical experience of CFD codes and techniques is desirable, preferably commercial codes such as Fluent, CFX or STAR. - Experience in 3D CAD, preferably Pro Engineer and Solid Works would be beneficial although not essential. http://www.polytec.co.uk/jobs/principal_analytical_engineer-_product_development_22369.html Fri, 27 Nov 2009 11:01:06 GMT Our client, based just outside Cambridge, requires an experienced qualified wirer to build general control panels and special purpose machinery. You will also be involved in prototype wiring and be responsible for the work load for the team each day, so some previous supervisory experience will be required. The company manufacture electron beam welding equipment. You will be working from diagrams and notes from engineers on the build. The company operate a fairly flexible hours system and are open from 7am - 6pm. http://www.polytec.co.uk/jobs/wirer_22176.html Fri, 18 Sep 2009 11:01:05 GMT Our client is looking for an Optical Physicist to work on client assignments within multi-disciplinary teams undertaking design tasks principally of new optical and opto-electronic systems. Specific responsibilities:This is an excellent opportunity for a physicist with the ambition and ability to achieve excellent results in a highly demanding industry and to find novel and radical solutions to new and existing problems under tough commercial and time restraints.- You will be using your strong technical skills to make a significant contribution to development projects, from initial concepts through to final delivery. - You will be taking the lead optical design role on multidisciplinary projects, including hands-on product development, design of optical and sensing systems and components, systems engineering, as well as taking the lead role in planning, proposal and concept generation, project management and liaison with clients.- You will also use your strong creative and technical skills to make a significant contribution to development projects and to participate in consultancy work within client companies.- You will be expected to liaise with others across many engineering disciplines and be responsible for specifying, designing and executing experimental programmes with teams of scientists and technicians. - You will manage tasks within projects requiring delivery within tight timescales and budgets, managing both internal and external resources. - There are opportunities for this side of the role to develop rapidly into management of projects including having full responsibility for delivery to our clients.Minimum requirements:To meet the requirements of this role you will have:- A good first degree or PhD in physics or a related engineering discipline- Experience in delivering optical or opto-electronic systems, with an emphasis on sensing and analytical measurement- Experience in using optical design tools- An imaginative and inquisitive mind, eager to learn new skills and to develop solutions for interesting and complex problems * Good communication skills, both verbal and writtenIn addition, any experience of the following will also be beneficial:- Product development in a commercial environment- C or MATLAB- Signal chain and system performance modelling and analysis- Algorithm development for sensing applications- Sensing technologies applicable to a range of physical effectsPLEASE NOTE: Due to the nature of some of the work, it will be necessary to obtain security clearance for the successful applicant, and therefore the applicant must hold UK nationality. http://www.polytec.co.uk/jobs/optical_physicist_22031.html Mon, 20 Jul 2009 14:01:05 GMT Main purpose of the jobTo work within multi-disciplinary teams on major development projects, contributing technically and using your existing expertise in innovative product design and development. Specific responsibilities This is an excellent opportunity for an engineer with the ambition and ability to achieve excellent results in a highly demanding industry and to find novel and radical solutions to new and existing problems under tough commercial and time restraints.You will be using your strong technical skills to make a significant contribution to development projects, from initial concepts through to final delivery. This will include:- Concept generation- Analysis and development of system architectures- Analogue, digital and power electronics design- Working closely with other engineers and technicians to implement detailed design solutions - Specifying, designing and executing experimental programmes with teams of scientists and technicians- Proof-of-concept prototypes- Writing technical reports and producing high quality design documentation- Involvement in transfer to manufactureMinimum requirements To meet the demanding requirements of this role you will have:- An excellent first degree in electronic engineering or a related discipline- Some relevant post graduate industrial experience in electronics hardware design for manufacturing in volume- Strong technical skills, with key strengths in digital and analogue electronics design- A genuine passion for electronics, and engineering in general- A creative approach to problem solving and concept generation- An appreciation of the use of engineering analysis in product developmentIn addition, qualifications and experience in the following areas would be beneficial:- Power electronics design- Control engineering- Audio engineering- An ability to apply Matlab / Simulink as a design and simulation tool- Micro controller systems design and embedded control systems- Embedded software design and implementation- A post-graduate qualification with a high level of practical experience http://www.polytec.co.uk/jobs/electronics_engineer-_volume_products_group_21974.html Fri, 03 Jul 2009 15:01:04 GMT Main purpose of the jobTo work within multi-disciplinary teams on major development projects, contributing technically and using your existing expertise in transfer-to-manufacture and new product introduction.Specific responsibilities Our client is currently looking to build a stronger offering in transfer-to-manufacture and new product introductions. - You will support the Campaign Managers in developing this side of the business by managing the transfer to manufacture for existing and new projects, mainly in the consumer electronics market sector. - You will be responsible for helping to develop a new offering with a high degree of commercial and technical exposure- You will also be expected to contribute technically to projects, developing novel and radical solutions to new and existing problems under tough commercial and time restraints. - You will be involved in concept generation, analysis and development of system architectures, and analogue, digital and power electronics design. - You will liaise with others across many engineering disciplines and be responsible for specifying, designing and executing experimental programmes with teams of scientists and technicians. - There are opportunities for both aspects of the role to develop rapidly into the management of projects including having full responsibility for delivery to our clients. Minimum requirements- An excellent first degree in electronic engineering or a related discipline- A genuine passion for electronics, and engineering in general- Significant and relevant post graduate industrial experience- Strong technical skills, with key strengths in digital and analogue electronics design- Experience in DfM, design for test, and reliability engineering- Proven track record in managing new product introduction in Eastern Europe and Asia, particularly in the consumer electronics sector- Previous experience in manufacturer partner selectionIn addition, any experience of the following will also be beneficial:- Power electronics design- Control engineering- Micro controller systems design and embedded control systems- Embedded software design and implementation- Experience of high value programme management- A post-graduate qualification with a high level of practical experience would also be advantageous http://www.polytec.co.uk/jobs/senior_electronic_engineer-_npi_21885.html Tue, 26 May 2009 12:01:04 GMT Our client is currently seeking an Electronics Design Engineer.Job Description:Working within an established team of electronics/software/mechanical engineers, you will be adaptable, flexible in approach, and with broad experience covering a range of electronic engineering disciplines. Work will involve carrying out electronic engineering across the full product lifecycle including requirements capture, system and circuit design, development of hardware and embedded software, verification and validation, and product support. The role will also involve assisting with proposals for customers and potential visits to customer sites. In the more senior roles, you will also act as Team Leader and System Design Authority on designated bids and programmes to ensure that the requirements are being met fully in line with customer expectations. You will have been working within the defence/aerospace industry, and possess a high level of communication skills including good specification and report writing skills, and will have a high degree of professionalism.SKILLS:*Discrete electronics design and schematic capture, *High Speed Digital systems and Analogue Electronics *FPGAs, DSPs, Power PCs, high voltage/current electronics.*VHDL, Embedded C *Schematic capture e.g. Orcad, FPGA development tools *DO-254/DO-178BXilinx, Actel and Altera ToolsMentor Graphics, modelsim*Avionics, Communications *Safety critical systems, Data Communications, Voice Communications, Security and Encryption http://www.polytec.co.uk/jobs/development_engineer_-_hardware_20262.html Thu, 30 Jul 2009 16:01:19 GMT Our clients are looking to recruit a consultant in optics to join their science and systems group. The group develops leading edge technologies such as microfluidics, optics, micro-mechanical devices and products such as medical diagnostics, fuel cells, displays and sensors for a range of markets from healthcare to consumer products.They are seeking a highly skilled consultant with a background in optical physics and engineering to lead demanding development projects and build new business to join our team. The candidate will have first class technical and communication skills, experience at leading large multidisciplinary projects and an interest in and aptitude for developing business.Qualifications- Physicist or Engineer with a 1st or 2.1 degree and PhD.- Track record at commercialising complex optical or optoelectronic technology in an industrial setting and delivering multidisciplinary projects against challenging timelines and product requirements.- Good market awareness and keen interest and capability in developing new market opportunities for technology. Business development or similar experience preferred.- Very good communication and team skills including leading multi-disciplinary science and engineering teams.The Role- Contribute to technically demanding development projects in a technical and/or project management capacity.- Take the lead in client communications and management.- Take responsibility for best in class project delivery.- Identify and pursue opportunities to develop new business through individual and team creativity and building relationships with international clients. http://www.polytec.co.uk/jobs/consultant_in_optics_19878.html Tue, 11 Dec 2007 14:01:07 GMT Our clients are looking for an Optical Physicist to join their science and systems group. This group develops leading edge technologies such as microfluidics, optics, micro-mechanical devices and products such as medical diagnostics, fuel cells, displays and sensors for a range of markets from healthcare to consumer products.They are seeking a highly skilled optical physicist/engineer to contribute to and potentially lead demanding development projects. The candidate should have first class technical, communication and creativity skills and be capable of developing their role to include more general consulting, large programme management and business development.Qualifications- Physicist or Engineer with a 1st or 2.1 degree and PhD from leading institute- Strong working knowledge in imaging and geometric optics, optical design, simulation software and device fabrication and testing.- Very good oral and written communication, presentation, and team skills.- Project management and commercial experience an advantage.The Role- Optical physicist/engineer contributing to and potentially leading technically demanding development projects.- Participate in the client interface, communication and management.- Take responsibility for best in class project delivery. http://www.polytec.co.uk/jobs/optical_physicist_19877.html Tue, 11 Dec 2007 14:01:07 GMT Our client is seeking a development engineer with analogue hardware experience. The ideal candidate will have six or more year's design experience of high bandwidth, low noise analogue circuits for data capture in excess of 300MHz. Main responsibilities will be designing ultra high performance front end circuits for new products. Experience should include: Designs using discrete active and passive components, High impedance buffers (FETs), programmable gain amplifiers and attenuators, Multiplexers, filters, differential drivers and ADCs, PCB layout for high performance and EMC compliance (ideally hands on experience) and design simulation experience. Knowledge of the following would be an advantage: Analogue ASIC and custom chip design. http://www.polytec.co.uk/jobs/development_engineer_-_analogue_hardware_17518.html Thu, 30 Jul 2009 16:01:20 GMT